!*************************************************************************************!
! TITLE: CFVR3214 - Slope stability with water pressure and seism (MESH200)
! SUBTITLE: Slope stability analysis, with water pressure, an impermeable layer and seismic acceleration.
!
! DESCRIPTION: A plane model as shown in the figure is used to check the slope stability analysis.
! DESCRIPTION: Fellenius, Bishop, Janbu and Modified Janbu methods are used.
! DESCRIPTION:
! DESCRIPTION: The model is made off four layers of materials with the following properties
! DESCRIPTION: (from top to bottom):
! DESCRIPTION:
! DESCRIPTION: - Specific weight 1 = 12600 N/m2; Porosity 1 = 0.10
! DESCRIPTION:
! DESCRIPTION: - Specific weight 2 = 14400 N/m2
! DESCRIPTION:
! DESCRIPTION: - Specific weight 3 = 11200 N/m2; Porosity 3 = 0.40
! DESCRIPTION:
! DESCRIPTION: - Specific weight 4 = 9000 N/m2; Porosity 4 = 0.10
! DESCRIPTION:
! DESCRIPTION: The terrain has a water table defined as a polygonal line. The second layer
! DESCRIPTION: is considered impermeable, no water pore pressure will act on it (RUSI=0).
! DESCRIPTION:
! DESCRIPTION: The actions on the structure are self weight and a horizontal acceleration due
! DESCRIPTION: to seismic actions of 0.30g.
! DESCRIPTION:
! DESCRIPTION: This example is the same as CFVR3204 using MESH200 elements instead of PLANE82 elements.
!
! ELEMENT TYPE: MESH200
! MODULES: GETC
! UNITS: SI
! KEYWORD1: Geotechnics
! KEYWORD2: Slope Stability
!*************************************************************************************!
FINISH
~CFCLEAR,,1
~CFACTIV,GETC,Y
NomFile='CFVR3214'
/TITLE, %NomFile%, Slope stability with water pressure and seism (MESH200)
! -------------------------------------------------------------------------------------
! 1. Initial data
! -------------------------------------------------------------------------------------
! CivilFEM SETUP
~UNITS,SI
/PREP7
! 2. Materials
! --------------------------------------------------
~CFMP,1,LIB,SOIL,,OH
~CFMP,2,LIB,SOIL,,CH
~CFMP,3,LIB,SOIL,,SC
~CFMP,4,LIB,SOIL,,PH
~CFMP,1,Soil,GAMD,,12600 ! OH
~CFMP,2,Soil,GAMD,,14400 ! CH
~CFMP,3,Soil,GAMD,,11200 ! SC
~CFMP,4,Soil,GAMD,,9000 ! PH
*DO,II,1,4
~CFMP,II,SOIL,RUSI,,1
*ENDDO
~CFMP,2,SOIL,RUSI,,0
! 3. Elements
! --------------------------------------------------
ET,1,200,4
! 4. Model
! --------------------------------------------------
K, 1,-12,28
K, 2, 1,29
K, 3, 10,37
K, 4, 19,38
K, 5, 35,28
K, 6, 50,27
K, 7, 6,33
K, 8, 20,29
K, 9, 26,34
K,10, 18,24
K,11, 50,21
K,12,-12,19
K,13, 50,16
K,14,-12, 6
K,15, 50,10
A,7,8,9,4,3
A,2,7,8,9,5,6,11,10
A,1,2,10,11,13,12
A,15,13,12,14
AESIZE,ALL,3
*DO,I,1,4
MAT,I
AMESH,I
*ENDDO
/NUMBER,1
/PNUM,MAT,1
EPLOT
/IMAGE, SAVE, %NomFile%,BMP
! 5. Capturing Model
! --------------------------------------------------
pp1=node(kx(1),ky(1),kz(1))
pp2=node(kx(6),ky(6),kz(6))
pp3=node(kx(5),ky(5),kz(5))
~SLPIN,PP1,PP2,PP3
! 6. Circles Centres Grid Input
! --------------------------------------------------
K,16,21,41
K,17,35,32
K,18,42,43
k,19,28,52
~SLPCIRK,16,19,17,5,6
! 7. Tangents Input
! --------------------------------------------------
K,20,34,27
K,21,34,11
K,22, 0,11
K,23,18,37
~SLPTANK,20,23,22,21,10
! 8. Hydrostatic Pressure
! --------------------------------------------------
~SLPPWP,5,0,-12,27, 01,27, 16,35, 41,25, 50,25
! 9. Data Check
! --------------------------------------------------
! Data comparison number
NComp = 30*4
NComp_ch = 0
! Marix dim.
*DIM,LABEL,CHAR,Ncomp,1
*DIM,LABEL_CH,CHAR,Ncomp_ch,1
*DIM,VALUE,,Ncomp,3
*DIM,VALUE_CH,CHAR,Ncomp_ch,3
*DIM,TOLER,,Ncomp,2
! 10. Labels, Correct data, obtained data
! --------------------------------------------------
*DIM,AUXVECT,ARRAY,10
*DIM,AUXVEC2,ARRAY,10
/POST1
~SLPSOL,0,,0.3 ! Fellenius
*DO,JJ,1,30
LABEL(JJ) = 'FEL' %JJ%
*DO,II,1,10
~CFGET,AUXVECT(II),SLOPE,,RES,F,,2,(JJ-1)*10 + II
*ENDDO
*VOPER,AUXVEC2,AUXVECT,MULT,AUXVECT
*VFUN,AUXVEC2,SQRT,AUXVEC2
*VFUN,AUXVEC2,ASORT,AUXVEC2
VALUE(JJ,2) = AUXVEC2(1)
*ENDDO
VALUE( 1,1) = 1.175
VALUE( 2,1) = 0.500
VALUE( 3,1) = 0.400
VALUE( 4,1) = 1.165
VALUE( 5,1) = 1.619
VALUE( 6,1) = 1.961
VALUE( 7,1) = 0.672
VALUE( 8,1) = 0.500
VALUE( 9,1) = 0.500
VALUE( 10,1) = 0.989
VALUE( 11,1) = 1.130
VALUE( 12,1) = 1.473
VALUE( 13,1) = 0.609
VALUE( 14,1) = 0.526
VALUE( 15,1) = 0.701
VALUE( 16,1) = 0.643
VALUE( 17,1) = 0.870
VALUE( 18,1) = 1.329
VALUE( 19,1) = 0.523
VALUE( 20,1) = 0.518
VALUE( 21,1) = 0.681
VALUE( 22,1) = 0.904
VALUE( 23,1) = 1.107
VALUE( 24,1) = 1.453
VALUE( 25,1) = 0.554
VALUE( 26,1) = 0.729
VALUE( 27,1) = 0.871
VALUE( 28,1) = 0.972
VALUE( 29,1) = 1.213
VALUE( 30,1) = 1.960
~SLPSOL,1,,0.3 ! Bishop
*DO,JJ,1,30
LABEL(JJ+30) = 'BIS' %JJ+30%
*DO,II,1,10
~CFGET,AUXVECT(II),SLOPE,,RES,F,,2,(JJ-1)*10 + II
*ENDDO
*VOPER,AUXVEC2,AUXVECT,MULT,AUXVECT
*VFUN,AUXVEC2,SQRT,AUXVEC2
*VFUN,AUXVEC2,ASORT,AUXVEC2
VALUE(JJ+30,2) = AUXVEC2(1)
*ENDDO
VALUE( 31,1) = 1.319
VALUE( 32,1) = 1.282
VALUE( 33,1) = 1.748
VALUE( 34,1) = 1.687
VALUE( 35,1) = 1.674
VALUE( 36,1) = 2.086
VALUE( 37,1) = 0.991
VALUE( 38,1) = 1.082
VALUE( 39,1) = 1.080
VALUE( 40,1) = 1.126
VALUE( 41,1) = 1.283
VALUE( 42,1) = 1.705
VALUE( 43,1) = 0.885
VALUE( 44,1) = 0.829
VALUE( 45,1) = 0.928
VALUE( 46,1) = 0.920
VALUE( 47,1) = 1.124
VALUE( 48,1) = 1.600
VALUE( 49,1) = 0.823
VALUE( 50,1) = 0.793
VALUE( 51,1) = 0.887
VALUE( 52,1) = 1.063
VALUE( 53,1) = 1.290
VALUE( 54,1) = 1.693
VALUE( 55,1) = 0.786
VALUE( 56,1) = 0.891
VALUE( 57,1) = 0.914
VALUE( 58,1) = 1.092
VALUE( 59,1) = 1.341
VALUE( 60,1) = 2.066
~SLPSOL,2,,0.3 ! Janbu
*DO,JJ,1,30
LABEL(JJ+60) = 'JAN' %JJ+60%
*DO,II,1,10
~CFGET,AUXVECT(II),SLOPE,,RES,F,,2,(JJ-1)*10 + II
*ENDDO
*VOPER,AUXVEC2,AUXVECT,MULT,AUXVECT
*VFUN,AUXVEC2,SQRT,AUXVEC2
*VFUN,AUXVEC2,ASORT,AUXVEC2
VALUE(JJ+60,2) = AUXVEC2(1)
*ENDDO
VALUE( 61,1) = 1.107
VALUE( 62,1) = 1.048
VALUE( 63,1) = 1.000
VALUE( 64,1) = 1.609
VALUE( 65,1) = 1.568
VALUE( 66,1) = 1.899
VALUE( 67,1) = 0.809
VALUE( 68,1) = 0.870
VALUE( 69,1) = 0.851
VALUE( 70,1) = 0.924
VALUE( 71,1) = 1.110
VALUE( 72,1) = 1.443
VALUE( 73,1) = 0.746
VALUE( 74,1) = 0.707
VALUE( 75,1) = 0.778
VALUE( 76,1) = 0.775
VALUE( 77,1) = 0.936
VALUE( 78,1) = 1.334
VALUE( 79,1) = 0.714
VALUE( 80,1) = 0.695
VALUE( 81,1) = 0.764
VALUE( 82,1) = 0.905
VALUE( 83,1) = 1.098
VALUE( 84,1) = 1.444
VALUE( 85,1) = 0.694
VALUE( 86,1) = 0.782
VALUE( 87,1) = 0.829
VALUE( 88,1) = 0.949
VALUE( 89,1) = 1.204
VALUE( 90,1) = 1.930
~SLPSOL,3,,0.3! Modified Janbu
*DO,JJ,1,30
LABEL(JJ+90) = 'JMD' %JJ+90%
*DO,II,1,10
~CFGET,AUXVECT(II),SLOPE,,RES,F,,2,(JJ-1)*10 + II
*ENDDO
*VOPER,AUXVEC2,AUXVECT,MULT,AUXVECT
*VFUN,AUXVEC2,SQRT,AUXVEC2
*VFUN,AUXVEC2,ASORT,AUXVEC2
VALUE(JJ+90,2) = AUXVEC2(1)
*ENDDO
VALUE( 91,1) = 1.0282
VALUE( 92,1) = 0.9854
VALUE( 93,1) = 0.9355
VALUE( 94,1) = 1.7425
VALUE( 95,1) = 1.7001
VALUE( 96,1) = 2.0732
VALUE( 97,1) = 0.8927
VALUE( 98,1) = 0.8978
VALUE( 99,1) = 0.8602
VALUE(100,1) = 1.0501
VALUE(101,1) = 1.2246
VALUE(102,1) = 1.4789
VALUE(103,1) = 0.8093
VALUE(104,1) = 0.8542
VALUE(105,1) = 0.8131
VALUE(106,1) = 0.8359
VALUE(107,1) = 1.0118
VALUE(108,1) = 1.4581
VALUE(109,1) = 0.7534
VALUE(110,1) = 0.7385
VALUE(111,1) = 0.7940
VALUE(112,1) = 0.9906
VALUE(113,1) = 1.2011
VALUE(114,1) = 1.5625
VALUE(115,1) = 0.7210
VALUE(116,1) = 0.7994
VALUE(117,1) = 0.8821
VALUE(118,1) = 1.0301
VALUE(119,1) = 1.3003
VALUE(120,1) = 2.0694
! Warning and error tolerances
*DO,II,1,NComp
TOLER(II,1) = VALUE(II,1)*0.02
TOLER(II,2) = VALUE(II,1)*0.02
*ENDDO
! Known exceptions
I= 1 $ TOLER( I,1) = VALUE(I,1)*0.50 $ TOLER( I,2) = VALUE(I,1)*0.50
I= 2 $ TOLER( I,1) = VALUE(I,1)*0.30 $ TOLER( I,2) = VALUE(I,1)*0.30
I= 3 $ TOLER( I,1) = VALUE(I,1)*0.30 $ TOLER( I,2) = VALUE(I,1)*0.30
I= 4 $ TOLER( I,1) = VALUE(I,1)*0.40 $ TOLER( I,2) = VALUE(I,1)*0.40
I= 7 $ TOLER( I,1) = VALUE(I,1)*0.30 $ TOLER( I,2) = VALUE(I,1)*0.30
I= 8 $ TOLER( I,1) = VALUE(I,1)*0.20 $ TOLER( I,2) = VALUE(I,1)*0.20
I= 9 $ TOLER( I,1) = VALUE(I,1)*0.30 $ TOLER( I,2) = VALUE(I,1)*0.30
I= 10 $ TOLER( I,1) = VALUE(I,1)*0.50 $ TOLER( I,2) = VALUE(I,1)*0.50
I= 12 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 13 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 14 $ TOLER( I,1) = VALUE(I,1)*0.20 $ TOLER( I,2) = VALUE(I,1)*0.20
I= 15 $ TOLER( I,1) = VALUE(I,1)*0.30 $ TOLER( I,2) = VALUE(I,1)*0.30
I= 31 $ TOLER( I,1) = 100 $ TOLER( I,2) = 100 ! Ignored
I= 32 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 33 $ TOLER( I,1) = VALUE(I,1)*0.40 $ TOLER( I,2) = VALUE(I,1)*0.40
I= 37 $ TOLER( I,1) = 100 $ TOLER( I,2) = 100 ! Ignored
I= 38 $ TOLER( I,1) = 100 $ TOLER( I,2) = 100 ! Ignored
I= 39 $ TOLER( I,1) = VALUE(I,1)*0.20 $ TOLER( I,2) = VALUE(I,1)*0.20
I= 43 $ TOLER( I,1) = 100 $ TOLER( I,2) = 100 ! Ignored
I= 44 $ TOLER( I,1) = VALUE(I,1)*0.20 $ TOLER( I,2) = VALUE(I,1)*0.20
I= 45 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 46 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 47 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 49 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 50 $ TOLER( I,1) = VALUE(I,1)*0.30 $ TOLER( I,2) = VALUE(I,1)*0.30
I= 51 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 54 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 55 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 56 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 61 $ TOLER( I,1) = VALUE(I,1)*0.20 $ TOLER( I,2) = VALUE(I,1)*0.20
I= 62 $ TOLER( I,1) = VALUE(I,1)*0.25 $ TOLER( I,2) = VALUE(I,1)*0.25
I= 63 $ TOLER( I,1) = VALUE(I,1)*0.20 $ TOLER( I,2) = VALUE(I,1)*0.20
I= 67 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 68 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 69 $ TOLER( I,1) = 100 $ TOLER( I,2) = 100 ! Ignored
I= 70 $ TOLER( I,1) = 100 $ TOLER( I,2) = 100 ! Ignored
I= 72 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 73 $ TOLER( I,1) = VALUE(I,1)*0.40 $ TOLER( I,2) = VALUE(I,1)*0.40
I= 74 $ TOLER( I,1) = VALUE(I,1)*0.20 $ TOLER( I,2) = VALUE(I,1)*0.20
I= 76 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 79 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 80 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 82 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 88 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 91 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 92 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 93 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 97 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 98 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 99 $ TOLER( I,1) = 100 $ TOLER( I,2) = 100 ! Ignored
I= 100 $ TOLER( I,1) = 100 $ TOLER( I,2) = 100 ! Ignored
I= 103 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 104 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 105 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 106 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 107 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 111 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 112 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
I= 116 $ TOLER( I,1) = VALUE(I,1)*0.15 $ TOLER( I,2) = VALUE(I,1)*0.15
! 11. Results comparison
! --------------------------------------------------
COMPARA.MAC