!*************************************************************************************!
! TITLE: CFVR7055 - Compression checking according to AASHTO 2010
! SUBTITLE: Compression checking of a cantilever steel beam
!
! DESCRIPTION: A steel cantilever beam with built-up channel shape section is subjected
! DESCRIPTION: to an axial compression force of 1 MN at free end.
! DESCRIPTION:
! DESCRIPTION: Determine the total criterion according to AASHTO 2010.
! DESCRIPTION:
!
! ELEMENT TYPE: BEAM188
! MODULES:
! UNITS: SI
! KEYWORD1: Beam
! KEYWORD2: Cross Section
! KEYWORD3: Code Checking/Design
! KEYWORD4: Steel
! KEYWORD5: AASHTO10
!
!*************************************************************************************!
FINISH
~CFCLEAR,,1
   NomFile='CFVR7055'
 /TITLE, %NomFile%, Compression checking according to AASHTO 2010

! -------------------------------------------------------------------------------------
! Initial data
! -------------------------------------------------------------------------------------
! CivilFEM SETUP

~CODESEL,AASHTO10,EC2-91,EC2-91,,EC8-94

/PREP7

ET,1,Beam188,,,2

~CFMP,1,LIB,STEEL,ASTM,A441
~SSECDMS,1,C,1,0.6,0.01,0.25,0.015	! Channel by dimensions
~MEMBPRO,1,AASHTO10,ALL,2.0,2.000,2.000,1.000,1.000,0.000,1.000,1.000,0.000,
~BMSHPRO,1,BEAM,1,1,,,188,1,1,,Beam 1

N,1,
N,2,2
E,1,2

/SHRINK,0
/ESHAPE,1.0

EPLOT

D,1,ALL

F,2,FX,-1e6

/SOLU
SOLVE

/POST1
~CFSET,0,1,LAST

~CHKSTL,COMPFBK

!--------------------------------------------------------------------------------------
! DATA CHECK
!--------------------------------------------------------------------------------------
! Data comparison number
  NComp = 7
  NComp_ch = 0

! Matrix dim.
  *DIM,LABEL,CHAR,Ncomp,1
  *DIM,LABEL_CH,CHAR,Ncomp_ch,1
  *DIM,VALUE,,Ncomp,3
  *DIM,VALUE_CH,CHAR,Ncomp_ch,3
  *DIM,TOLER,,Ncomp,2

! Labels
  LABEL(1,1) = 'QS'
  LABEL(2,1) = 'QA'
  LABEL(3,1) = 'Q'
  LABEL(4,1) = 'PO'
  LABEL(5,1) = 'PE'
  LABEL(6,1) = 'PN'
  LABEL(7,1) = 'CRT_TOT'

! Correct values
  VALUE(1,1)= 0.797
  VALUE(2,1)= 0.897
  VALUE(3,1)= 0.715
  VALUE(4,1)= 3254779
  VALUE(5,1)= 10575781
  VALUE(6,1)= 2861403.5
  VALUE(7,1)= 0.388

! Comparison

 ~PLLSSTL,QS
 *GET,VALUE(1,2),ELEM,1,ETAB,CFETAB_I
 ~PLLSSTL,QA
 *GET,VALUE(2,2),ELEM,1,ETAB,CFETAB_I
 ~PLLSSTL,Q
 *GET,VALUE(3,2),ELEM,1,ETAB,CFETAB_I
 ~PLLSSTL,PO
 *GET,VALUE(4,2),ELEM,1,ETAB,CFETAB_I
 ~PLLSSTL,PE
 *GET,VALUE(5,2),ELEM,1,ETAB,CFETAB_I
 ~PLLSSTL,PN
 *GET,VALUE(6,2),ELEM,1,ETAB,CFETAB_I
 ~PLLSSTL,CRT_TOT
 *GET,VALUE(7,2),ELEM,1,ETAB,CFETAB_I


! Warning and error tolerances
  TOLER( 1, 1)= 1E-03   $ TOLER( 1, 2)= 1E-03
  TOLER( 2, 1)= 1E-03   $ TOLER( 2, 2)= 1E-03
  TOLER( 3, 1)= 1E-03   $ TOLER( 3, 2)= 1E-03
  TOLER( 4, 1)= 1E-02   $ TOLER( 4, 2)= 1E-02
  TOLER( 5, 1)= 1E+00   $ TOLER( 5, 2)= 1E+00	
  TOLER( 6, 1)= 1E+00   $ TOLER( 6, 2)= 1E+00	
  TOLER( 7, 1)= 1E-03   $ TOLER( 7, 2)= 1E-03
!--------------------------------------------------------------------------------------
! Results comparison
!--------------------------------------------------------------------------------------
  COMPARA.MAC