!*************************************************************************************!
! TITLE: CFVR7505 - Steel checking according to ANSI AISC N690-1994
! SUBTITLE: Compression checking of a cantilever steel beam
!
! DESCRIPTION: A steel cantilever beam with IPE T shape section is subjected to an axial
! DESCRIPTION: compression force of 2.5 KN at free end.
! DESCRIPTION:
! DESCRIPTION: Determine the total criterion according to ANSI AISC N690-1994.
! DESCRIPTION:
!
! ELEMENT TYPE: BEAM188
! MODULES:
! UNITS: SI
! KEYWORD1: Beam
! KEYWORD2: Cross Section
! KEYWORD3: Code Checking/Design
! KEYWORD4: Steel
! KEYWORD5: AISC N690-94
!
!*************************************************************************************!
  FINISH
  ~CFCLEAR,,1
  NomFile='CFVR7505'
  /TITLE, %NomFile%, Compression checking according to ANSI AISC N690

! -------------------------------------------------------------------------------------
! Initial data
! -------------------------------------------------------------------------------------
! CivilFEM SETUP
~CFACTIV,NUCL,Y
~CODESEL,N690,EC2-91,EC2-91,,EC8-94

/PREP7

ET,1,Beam188,,,2

~CFMP,1,LIB,STEEL,ASTM,A441
~SSECLIB,1,1,26,1   !1/2 IPE A 80
~MEMBPRO,1,N690,ALL,2,2,2,1,1
~BMSHPRO,1,BEAM,1,1,,,188,1,1,,Beam 1

N,1,
N,2,2
E,1,2

/SHRINK,0
/ESHAPE,1.0

EPLOT

D,1,ALL

F,2,FX,-2500

/SOLU
SOLVE

/POST1
~CFSET,0,1,LAST

~CHKSTL,COMPFBK

!--------------------------------------------------------------------------------------
! DATA CHECK
!--------------------------------------------------------------------------------------
! Data comparison number
  NComp = 6
  NComp_ch = 0

! Matrix dim.
  *DIM,LABEL,CHAR,Ncomp,1
  *DIM,LABEL_CH,CHAR,Ncomp_ch,1
  *DIM,VALUE,,Ncomp,3
  *DIM,VALUE_CH,CHAR,Ncomp_ch,3
  *DIM,TOLER,,Ncomp,2

! Labels
  LABEL(1,1) = 'QS'
  LABEL(2,1) = 'QA'
  LABEL(3,1) = 'Q'
  LABEL(4,1) = 'FAC'
  LABEL(5,1) = 'SLEND'
  LABEL(6,1) = 'CRT_TOT'

! Correct values
  VALUE(1,1)=1.0
  VALUE(2,1)=1.0
  VALUE(3,1)=1.0
  VALUE(4,1)=6960122
  VALUE(5,1)=384.6
  VALUE(6,1)=1.13

! Comparison

 ~PLLSSTL,QS
 *GET,VALUE(1,2),ELEM,1,ETAB,CFETAB_I
 ~PLLSSTL,QA
 *GET,VALUE(2,2),ELEM,1,ETAB,CFETAB_I
 ~PLLSSTL,Q
 *GET,VALUE(3,2),ELEM,1,ETAB,CFETAB_I
 ~PLLSSTL,FAC
 *GET,VALUE(4,2),ELEM,1,ETAB,CFETAB_I
 ~PLLSSTL,SLEND
 *GET,VALUE(5,2),ELEM,1,ETAB,CFETAB_I
 ~PLLSSTL,CRT_TOT
 *GET,VALUE(6,2),ELEM,1,ETAB,CFETAB_I


! Warning and error tolerances
  TOLER( 1, 1)= 1E-03   $ TOLER( 1, 2)= 1E-03
  TOLER( 2, 1)= 1E-03   $ TOLER( 2, 2)= 1E-03
  TOLER( 3, 1)= 1E-03   $ TOLER( 3, 2)= 1E-03
  TOLER( 4, 1)= 1E+04   $ TOLER( 4, 2)= 1E+04	! Rounding error accepted
  TOLER( 5, 1)= 1E-01   $ TOLER( 5, 2)= 1E-01   ! Rounding error accepted
  TOLER( 6, 1)= 1E-01   $ TOLER( 6, 2)= 1E-01   ! Rounding error accepted

!--------------------------------------------------------------------------------------
! Results comparison
!--------------------------------------------------------------------------------------
  COMPARA.MAC