Configuration

ConfigUnits:

System

Model Units.

Type:

Enumerate: { IS, BFeet, BInch, UserConsistent, User }

PrincipalUnits

Principal Units (for calculations): Calculations are always made in principal units and their derived consistent units, unless other units are specified at the end of the formula after a ‘;’..

Type:

SubscriptionDummy

DerivedUnits

Derived Units: The units derived from the principal ones are used for data input and visualization, and proper conversions are made before performing calculations in consistent units. The units in brackets, like ‘[m/s]’, are the derived consistent units of the principal ones..

Type:

SubscriptionDummy

IndependentUnits

Independent Units: The independent units do not depend on principal nor derived units..

Type:

SubscriptionDummy

SubscriptionDummy:

ANGULAR

Angular. | Constant: Constant value

Type:

Enumerate: { Deg, Rad }

ENERGY

Energy. | Constant: Constant value

Type:

Enumerate: { Joule, kJoule, Cal, kCal, BTU }

FORCE

Force. | Constant: Constant value

Type:

Enumerate: { dyn, N, kN, MN, lbf, ozf, kip, kp, Mp }

LENGTH

Length. | Constant: Constant value

Type:

Enumerate: { km, m, dm, cm, mm, in, ft, yd, mi }

TEMPERATURE

Temperature. | Constant: Constant value

Type:

Enumerate: { Kelvin, Celsius, Fahr }

TIME

Time. | Constant: Constant value

Type:

Enumerate: { s, Min, h, d }

Config:

NumDigitsToView

Digits to view (max: 15): Number of significant digits for number representation. Precision is independent from units. It should be smaller than “Precision digits” for number storage.. | Constraints: Conditions: Value must be greater or equal than 3.00 and lower or equal than 15.00.

Type:

int

NumDecimalsToResults

Decimals for results (max: 15): Number of decimals for results listings. Precision depends on units. It should be smaller than “Precision digits” for number storage.. | Constraints: Conditions: Value must be greater or equal than 3.00 and lower or equal than 15.00.

Type:

int

ScaleFactor

Scale factor: Loads and boundary conditions scale factor. | Constraints: Conditions: Value must be greater than 0.

Type:

Double

GeometricTolerance

Geometric tolerance: Tolerance for geometrical operations. | Constraints: Conditions: Value must be greater or equal than 0.00 and lower or equal than 0.00.

Type:

Double

MeshTolerance

Mesh tolerance: Tolerance to detect nodes on geometry. | Constraints: Conditions: Value must be greater or equal than 0.

Type:

Double

NodalForceCutOff

Force cut off: Nodal forces lower than the specified value will be considered as zero. | Constraints: Conditions: Value must be greater or equal than 0.

Type:

Double

NodalMomentCutOff

Moment cut off: Nodal moments lower than the specified value will be considered as zero. | Constraints: Conditions: Value must be greater or equal than 0.

Type:

Double

NodalDisplacementCutOff

Displacement cut off: Nodal displacement lower than the specified value will be considered as zero. | Constraints: Conditions: Value must be greater or equal than 0.

Type:

Double

AnalysisType

Analysis type.

Type:

AnalysisType

ActiveCodes

Active codes. | Constant: Constant value

Type:

ActiveCodes

ConfigCheck

Check/design: Checking and design parameters.

Type:

ConfigCheck

AnalysisType:

Discipline

Discipline. | Constant: Constant value

Type:

Enumerate: { Structural, Thermal, Seepage, AirportPavement }

Dimension

Dimension. | Constant: Constant value

Type:

Enumerate: { _2D, _3D }

TimeDependent

Time dependency.

Type:

Enumerate: { Static, Transient, Modal, Buckling, Harmonic }

ActiveCodes:

PrestressedConcreteCode

Code for prestressed concrete structures.

Type:

Enumerate: { EC2_08, EC2_91, ACI318_05, ACI318_14, ACI359_04, EHE_98, EHE_08, ITER }

SteelCode

Code for structural steel structures.

Type:

Enumerate: { EC3_05, BS5950_01, AISC_LRFD_13, AISC_LRFD_14, AASHTO_LRFD_12, AISC_ASD_13, AISC_ASD_14, AISC_15, GB50017, BPVC_III_NF, IS800_07, STRUCT_CODE_SP }

ConcreteCode

Code for reinforced concrete structures.

Type:

Enumerate: { EC2_08, EC2_91, ACI318_05, ACI318_14, ACI349_01, ACI349_06, ACI349_13, ACI359_04, EHE_98, EHE_08, CEBFIP, BS8110, AS3600, GB50010, GB50010_10, NBR6118, AASHTO, IS456, SP52_101_03, ITER, STRUCT_CODE_SP }

UpdateMat

Redefine properties of materials, sections and structural elements when code is changed.

Type:

bool

ConfigCheck:

NED

3D strains: Number of steps for strains for biaxial bending check (concrete).. | Constraints: Conditions: Value must be greater than 0.

Type:

int

NTD

3D angular: Number of steps in the angle of the neutral axis and the Y axis of section used in the calculation of a 3D interaction diagram (concrete).. | Constraints: Conditions: Value must be greater than 0.

Type:

int

Delta

Delta: Parameter to use origin or center in the 3D diagram/check.. | Constraints: Conditions: Value must be greater or equal than 0.00 and lower or equal than 1.00.

Type:

Double

N2D

2D steps: Number of strain stages used in the calculation of a 2D interaction diagram(concrete).. | Constraints: Conditions: Value must be greater than 0.

Type:

int

WMin

Min. Reinf. Factor: Minimum reinforcement factor for design.. | Constraints: Conditions: Value must be greater than 0.00 and lower than 1.00.

Type:

Double

WMax

Max. Reinf. Factor: Maximum reinforcement factor for design.. | Constraints: Conditions: Value must be lower than 1.00.

Type:

Double

Phi

Strength reduction factor: Strength reduction factor for bending criteria.. | Constraints: Conditions: Value must be greater than 0.00 and lower or equal than 1.00.

Type:

Double

LimCount

Max. Iterations: Maximum number of iterations for the design (concrete).. | Constraints: Conditions: Value must be lower than 2.00.

Type:

int

Parallel

Parallel: Allow parallel solving of check/design..

Type:

bool

changeTimeDependency(TimeDependent)

: Time dependency

Parameters:

Enumerate – { Static, Transient, Modal, Buckling, Harmonic } TimeDependent: Time dependency.

clearAll()

Removes all entities of the model

clearAllBC()

Removes all entities of the model

clearAllContacts()

Removes all entities of the model

clearAllCoordSys()

Removes all entities of the model

clearAllGeometry()

Removes all entities of the model

clearAllIC()

Removes all entities of the model

clearAllLC()

Removes all entities of the model

clearAllLG()

Removes all entities of the model

clearAllMaterials()

Removes all entities of the model

clearAllModelUtils()

Removes all entities of the model

clearAllParameters()

Removes all entities of the model

clearAllSE()

Removes all entities of the model

clearAllSections()

Removes all entities of the model

Log(LoggerMessage)

Prints a message to the output window.

Alias: LogInfo

Parameters:

LoggerMessage (str) – Message to show..

LogError(LoggerMessage)

Pints an error to the output window.

Parameters:

LoggerMessage (str) – Message to show..

LogWarning(LoggerMessage)

Pints a warning to the output window.

Parameters:

LoggerMessage (str) – Message to show..

ProgramPath()

Returns the program directory

Return type:

Returns the program directory

roundPrecision(Value)

Round using the number of decimals for precision set in Config

Parameters:

Value (Double) – Value to round.

Return type:

Rounded value as Double

roundResults(Value)

Round using the number of decimals for results set in Config

Parameters:

Value (Double) – Value to round.

Return type:

Rounded value as Double

roundView(Value)

Round using the number of decimals for view set in Config

Parameters:

Value (Double) – Value to round.

Return type:

Rounded value as Double

ViktorPath()

Returns the worker Viktor directory

Return type:

Returns the worker Viktor directory

WorkingPath()

Returns the working directory

Return type:

Returns the working directory

Enumerate: Length

Item Name	Description
km	Kilometer (km)
m	Meter (m)
dm	Decimeter (dm)
cm	Centimeter (cm)
mm	Millimeter (mm)
in	Inch (in)
ft	Foot (ft)
yd	Yard (yd)
mi	Mile (mi)

Enumerate: Reinforcement bars diameter

Item Name	Description
Length	([m])
mBar	Meter (m)
mmBar	Millimeter (mm)
inBar	Inch (in)

Enumerate: Area

Item Name	Description
Length2	([m²])
km2	Square kilometer (km²)
m2	Square meter (m²)
dm2	Square decimeter (dm²)
cm2	Square centimeter (cm²)
mm2	Square millimeter (mm²)
in2	Square inch (in²)
ft2	Square foot (ft²)
yd2	Square yard (yd²)
mi2	Square mile (mi²)

Enumerate: Volume

Item Name	Description
Length3	([m³])
m3	Cubic meter (m³)
dm3	Cubic decimeter (dm³)
cm3	Cubic centimeter (cm³)
mm3	Cubic millimeter (mm³)
l	Liter (l)
ml	Milliliter (ml)
gal	Gallon (gal)
pint	Pint (pint)
ozv	Fluid ounce (oz)
in3	Cubic inch (in³)
ft3	Cubic foot (ft³)

Enumerate: Force

Item Name	Description
dyn	Dyne (dyn)
N	Newton (N)
kN	kiloNewton (kN)
MN	MegaNewton (MN)
lbf	Pound force (lbf)
ozf	Ounce force (ozf)
kip	Kip (kip)
kp	Kilopond (kp)
Mp	Megapond (Mp)

Enumerate: Moment

Item Name	Description
ForcexLenght	([N·m])
Nxm	Newton meter (N·m)
kNxm	KiloNewton meter (kN·m)
MNxm	MegaNewton meter (MN·m)
lbfxin	Pound inch (lbf·in)
kipxin	Kip inch (kip·in)
lbfxft	Pound foot (lbf·ft)
kpxm	Kilopond meter (kp·m)
kpxcm	Kilopond centimeter (kp·cm)
kpxmm	Kilopond millimeter (kp·mm)
Mpxm	Megapond meter (Mp·m)
Mpxcm	Megapond centimeter (Mp·cm)
Mpxmm	Megapond millimeter (Mp·mm)

Enumerate: Bimoment

Item Name	Description
ForcexLenght2	([N·m²])
Nxm2	Newton square meter (N·m²)
kNxm2	KiloNewton square meter (kN·m²)
MNxm2	MegaNewton square meter (MN·m²)
lbfxin2	Pound square inch (lbf·in²)
kipxin2	Kip square inch (kip·in²)
lbfxft2	Pound square foot (lbf·ft²)
kpxm2	Kilopond square meter (kp·m²)
kpxcm2	Kilopond square centimeter (kp·cm²)
kpxmm2	Kilopond square millimeter (kp·mm²)
Mpxm2	Megapond square meter (Mp·m²)
Mpxcm2	Megapond square centimeter (Mp·cm²)
Mpxmm2	Megapond square millimeter (Mp·mm²)

Enumerate: Force per unit length

Item Name	Description
Force_Lenght	([N/m])
N_m	Newton per meter (N/m)
kN_m	KiloNewton per meter (kN/m)
MN_m	MegaNewton per meter (MN/m)
lbf_in	Pound per inch (lbf/in)
kip_in	Kip per inch (kip/in)
lbf_ft	Pound per foot (lbf/ft)
kp_m	Kilopond per meter (kp/m)
kp_cm	Kilopond per centimeter (kp/cm)
kp_mm	Kilopond per millimeter (kp/mm)
Mp_m	Megapond per meter (Mp/m)
Mp_cm	Megapond per centimeter (Mp/cm)
Mp_mm	Megapond per millimeter (Mp/mm)

Enumerate: Moment per rotation

Item Name	Description
Moment_Rotation	([N·m/°])
Nxm_rad	Newton meter per radian (N·m/rad)
Nxm_deg	Newton meter per degree (N·m/°)
kNxm_rad	KiloNewton meter per radian (kN·m/rad)
kNxm_deg	KiloNewton meter per degree (kN·m/°)
lbfxin_rad	Pound inch per radian (lbf·in/rad)
lbfxin_deg	Pound inch per degree (lbf·in/°)
kipxin_rad	Kip inch per radian (kip·in/rad)
kipxin_deg	Kip inch per degree (kip·in/°)
lbfxft_rad	Pound foot per radian (lbf·ft/rad)
lbfxft_deg	Pound foot per degree (lbf·ft/°)
kpxm_rad	Kilopond meter per radian (kp·m/rad)
kpxm_deg	Kilopond meter per degree (kp·m/°)

Enumerate: Moment per rotational velocity

Item Name	Description
Moment_RotationalVelocity	([N·m·s/°])
Nxmxs_rad	Newton meter second per radian (N·m·s/rad)
Nxmxs_deg	Newton meter second per degree (N·m·s/°)
kNxmxs_rad	KiloNewton meter second per radian (kN·m·s/rad)
kNxmxs_deg	KiloNewton meter second per degree (kN·m·s/°)
lbfxinxs_rad	Pound inch second per radian (lbf·in·s/rad)
lbfxinxs_deg	Pound inch second per degree (lbf·in·s/°)
kipxinxs_rad	Kip inch second per radian (kip·in·s/rad)
kipxinxs_deg	Kip inch second per degree (kip·in·s/°)
lbfxftxs_rad	Pound foot second per radian (lbf·ft·s/rad)
lbfxftxs_deg	Pound foot second per degree (lbf·ft·s/°)
kpxmxs_rad	Kilopond meter second per radian (kp·m·s/rad)
kpxmxs_deg	Kilopond meter second per degree (kp·m·s/°)

Enumerate: Spring stiffness per unit length

Item Name	Description
Spring_Per_Length	([N/m/m])
N_m_m	Newton per meter per meter (N/m/m)
kN_m_m	KiloNewton per meter per meter (kN/m/m)
MN_m_m	MegaNewton per meter per meter (MN/m/m)
lbf_in_in	Pound per inch per inch (lbf/in/in)
kip_in_in	Kip per inch per inch (kip/in/in)
lbf_ft_ft	Pound per foot per foot (lbf/ft/ft)
kp_m_m	Kilopond per meter per meter (kp/m/m)
kp_cm_cm	Kilopond per centimeter per centimeter (kp/cm/cm)
kp_mm_mm	Kilopond per centimeter per millimeter (kp/mm/mm)
Mp_m_m	Megapond per meter per meter (Mp/m/m)
Mp_cm_cm	Megapond per meter per centimeter (Mp/cm/cm)
Mp_mm_mm	Megapond per meter per millimeter (Mp/mm/mm)

Enumerate: Spring stiffness per unit area

Item Name	Description
Spring_Per_Area	([N/m/m²])
N_m_m2	Newton per meter per square meter (N/m/m²)
kN_m_m2	KiloNewton per meter per square meter (kN/m/m²)
MN_m_m2	MegaNewton per meter per square meter (MN/m/m²)
lbf_in_in2	Pound per inch per square inch (lbf/in/in²)
kip_in_in2	Kip per inch per square inch (kip/in/in²)
lbf_ft_ft2	Pound per foot per square foot (lbf/ft/ft²)
kp_m_m2	Kilopond per meter per square meter (kp/m/m²)
kp_cm_cm2	Kilopond per centimeter per square centimeter (kp/cm/cm²)
kp_mm_mm2	Kilopond per centimeter per square millimeter (kp/mm/mm²)
Mp_m_m2	Megapond per meter per square meter (Mp/m/m²)
Mp_cm_cm2	Megapond per meter per square centimeter (Mp/cm/cm²)
Mp_mm_mm2	Megapond per meter per square millimeter (Mp/mm/mm²)

Enumerate: Moment per unit length

Item Name	Description
ForcexLenght_Lenght	([N·m/m])
Nxm_m	Newton meter per meter (N·m/m)
kNxm_m	KiloNewton meter per meter (kN·m/m)
MNxm_m	MegaNewton meter per meter (MN·m/m)
lbfxin_in	Pound inch per inch (lbf·in/in)
kipxin_in	Kip inch per inch (kip·in/in)
lbfxft_ft	Pound foot per foot (lbf·ft/ft)
kpxm_m	Kilopond meter per meter (kp·m/m)
kpxcm_cm	Kilopond centimeter per centimeter (kp·cm/cm)
kpxmm_mm	Kilopond millimeter per millimeter (kp·mm/mm)
Mpxm_m	Megapond meter per meter (Mp·m/m)
Mpxcm_cm	Megapond meter per centimeter (Mp·cm/cm)
Mpxmm_mm	Megapond meter per millimeter (Mp·mm/mm)

Enumerate: Force per unit velocity

Item Name	Description
ForcexTime_Length	([N·s/m])
Nxs_m	Newton second per meter (N·s/m)
kNxs_m	KiloNewton second per meter (kN·s/m)
MNxs_m	MegaNewton second per meter (MN·s/m)
lbfxs_in	Pound second per inch (lbf·s/in)
lbfxs_ft	Pound second per foot (lbf·s/ft)
kpxs_m	Kilopond second per meter (kp·s/m)
Mpxs_m	Megapond second per meter (Mp·s/m)

Enumerate: Pressure

Item Name	Description
Force_Length2	([N/m²])
Pa	Pascal (Pa)
kPa	Kilopascal (kPa)
MPa	Megapascal (MPa)
psi	psi (psi)
ksi	ksi (ksi)
psf	psf (psf)
ftH2O	Foot of water (ft H₂0)
inH2O	Inch of water (in H₂0)
mH2O	Meter of water (m H₂0)
Kp_m2	Kiloponds per meter squared (kp/m²)
Kp_cm2	Kiloponds per centimeter squared (kp/cm²)
Kp_mm2	Kiloponds per millimeter squared (kp/mm²)
Mp_m2	Megaponds per meter squared (Mp/m²)
Mp_cm2	Megaponds per centimeter squared (Mp/cm²)
Mp_mm2	Megaponds per millimeter squared (Mp/mm²)
mmHg	Millimeters of mercury (mm Hg)
bar	Bar (bar)
atm	Atmosphere (atm)

Enumerate: Inverse pressure

Item Name	Description
Length2_Force	([m²/N])
inv_Pa	inverse pascal (1/Pa)
inv_kPa	inverse kilopascal (1/kPa)
inv_MPa	inverse megapascal (1/MPa)
inv_psi	inverse psi (1/psi)
inv_ksi	inverse ksi (1/ksi)
inv_psf	inverse psf (1/psf)
inv_Kp_m2	inverse kiloponds per meter squared (1/(kp/m²))
inv_Kp_cm2	inverse kiloponds per centimeter squared (1/(kp/cm²))
inv_Kp_mm2	inverse kiloponds per millimeter squared (1/(kp/mm²))
inv_Mp_m2	Inverse megaponds per meter squared (1/(Mp/m²))
inv_Mp_cm2	Inverse megaponds per centimeter squared (1/(Mp/cm²))
inv_Mp_mm2	Inverse megaponds per millimeter squared (1/(Mp/mm²))

Enumerate: Pressure per unit length

Item Name	Description
Pressure_Per_Length	([N/m²/m])
Pa_m	Pascal per meter (Pa/m)
kPa_m	KiloPascal per meter (kPa/m)
MPa_m	MegaPascal per meter (MPa/m)
psi_in	psi per inch (psi/in)
ksi_in	ksi per inch (ksi/in)
psf_ft	psf per foot (psf/ft)
inH2O_in	Inch of water per inch (in H₂0/in)
ftH2O_ft	Foot of water per foot (ft H₂0/ft)
mH2O_m	Meter of water per meter (m H₂0/m)
kp_m2_m	Kiloponds per meter squared per meter (kp/m²/m)
kp_cm2_cm	Kiloponds per centimeter squared per centimeter (Kp/cm²/cm)
kp_mm2_mm	Kiloponds per millimeter squared per millimeter (Kp/mm²/mm)
Mp_m2_m	Megaponds per meter squared per meter (Mp/m²/m)
Mp_cm2_cm	Megaponds per centimeter squared per centimeter (Mp/cm²/cm)
Mp_mm2_mm	Megaponds per millimeter squared per millimeter (Mp/mm²/mm)

Enumerate: Mass

Item Name	Description
Force_Length_Time2	[N/(m/s²)] ([kg])
g	Gram (g)
kg	Kilogram (kg)
lb	Pound (lb)
oz	Mass ounce (ozm)
slug	Slug (slug)
slinch	Slinch (slinch)
tn	Ton (tn)

Enumerate: Specific weigth

Item Name	Description
SW_Force_Length3	([N/m³])
N_m3	Newton per cubic meter (N/m³)
kp_m3	Kilopond per cubic meter (kp/m³)
kp_cm3	Kilopond per cubic centimeter (kp/cm³)
kp_in3	Kilopond per cubic inch (kp/in³)
kp_ft3	Kilopond per cubic foot (kp/ft³)
lbf_in3	Pound force per cubic inch (lbf/in³)
lbf_ft3	Pound force per cubic foot (lbf/ft³)

Enumerate: Density

Item Name	Description
Mass_Length3	([kg/m³])
g_cm3	Gram per cubic centimeter (g/cm³)
tn_m3	Ton per cubic meter (tn/m³)
kg_m3	Kilogram per cubic meter (kg/m³)
g_m3	Gram per cubic meter (g/m³)
g_l	Gram per liter (g/l)
kg_l	Kilogram per liter (kg/l)
oz_gal	Ounce per gallon (oz/gal)
lb_ft3	Pound per cubic foot (lb/ft³)
lb_in3	Pound per cubic inch (lb/in³)
lbfxs2_in4	Slinch per cubic inch (lbf·s²/in⁴)
lbfxs2_ft4	Slug per cubic foot (lbf·s²/ft⁴)

Enumerate: Time

Item Name	Description
s	Second (s)
Min	Minute (min)
h	Hour (h)
d	Day (d)

Enumerate: Age of the material

Item Name	Description
Time	([s])
sAge	Second (s)
minAge	Minute (min)
hAge	Hour (h)
dAge	Day (day)
monAge	Month (month)
yrAge	Year (y)

Enumerate: Temperature

Item Name	Description
Kelvin	Kelvin (K)
Celsius	Celsius (°C)
Fahr	Fahrenheit (°F)

Enumerate: Temperature increment per unit length

Item Name	Description
Temperature_Inc_Length	([ΔK/m])
inc_K_m	Kelvin increment per meter (ΔK/m)
inc_K_ft	Kelvin increment per feet (ΔK/ft)
inc_K_in	Kelvin increment per inch (ΔK/in)
inc_C_m	Celsius increment per meter (ΔC/m)
inc_C_ft	Celsius increment per feet (ΔC/ft)
inc_C_in	Celsius increment per inch (ΔC/in)
inc_F_m	Fahrenheit increment per meter (ΔF/m)
inc_F_ft	Fahrenheit increment per feet (ΔF/ft)
inc_F_in	Fahrenheit increment per inch (ΔF/in)

Enumerate: Temperature increment

Item Name	Description
Temperature_Inc	([ΔK])
inc_K	Kelvin increment (ΔK)
inc_C	Celsius increment (ΔC)
inc_F	Fahrenheit increment (ΔF)

Enumerate: Inverse temperature increment

Item Name	Description
Inv_Temperature_Inc	([1/ΔK])
inv_inc_K	1/Kelvin increment (1/ΔK)
inv_inc_C	1/Celsius increment (1/ΔC)
inv_inc_F	1/Fahrenheit increment (1/ΔF)

Enumerate: Inverse time

Item Name	Description
Inv_Time	([1/s])
inv_s	1/Second (1/s)
inv_min	1/Minute (1/min)
inv_h	1/Hour (1/hr)
inv_day	1/Day (1/day)

Enumerate: Inverse length

Item Name	Description
Inv_Length	([1/m])
inv_km	1/Kilometer (1/km)
inv_m	1/Meter (1/m)
inv_dm	1/Decimeter (1/dm)
inv_cm	1/Centimeter (1/cm)
inv_mm	1/Millimeter (1/mm)
inv_in	1/Inch (1/in)
inv_ft	1/Foot (1/ft)
inv_yd	1/Yard (1/Yd)
inv_mi	1/Mile (1/mi)

Enumerate: Velocity

Item Name	Description
Length_Time	([m/s])
m_s	Meter per second (m/s)
m_h	Meter per hour (m/h)
km_h	Kilometer per hour (km/h)
m_d	Meter per day (m/d)
mm_h	Millimeter per hour (mm/h)
in_s	Inch per second (in/s)
ft_s	Foot per second (ft/s)
mi_h	Mile per hour (mi/h)

Enumerate: Acceleration

Item Name	Description
Length_time2	([m/s²])
m_s2	Meter per second squared (m/s²)
m_h2	Meter per hour squared (m/h²)
km_h2	Kilometer per hour squared (km/h²)
in_s2	Inch per second squared (in/s²)
ft_s2	Foot per second squared (ft/s²)
mi_h2	Mile per hour squared (mi/h²)
gs	Times gravity (×g)

Enumerate: Area per time

Item Name	Description
Length2_Time	([m²/s])
m2_h	Square meter per hour (m²/h)
m2_s	Square meter per second (m²/s)
in2_s	Square inch per second (in²/s)
ft2_s	Square foot per second (ft²/s)
ft2_h	Square foot per hour (ft²/h)
St	Stokes (St)

Enumerate: Area per length

Item Name	Description
Length2_Length	([m²/m])
m2_m	Square meter per meter (m²/m)
cm2_m	Square centimeter per meter (cm²/m)
mm2_m	Square millimeter per meter (mm²/m)
in2_m	Square inch per meter (in²/m)
ft2_m	Square foot per meter (ft²/m)
m2_in	Square meter per inch (m²/in)
cm2_in	Square centimeter per inch (cm²/in)
mm2_in	Square millimeter per inch (mm²/in)
in2_in	Square inch per inch (in²/in)
ft2_in	Square foot per inch (ft²/in)
m2_ft	Square meter per foot (m²/ft)
cm2_ft	Square centimeter per foot (cm²/ft)
mm2_ft	Square millimeter per foot (mm²/ft)
in2_ft	Square inch per foot (in²/ft)
ft2_ft	Square foot per foot (ft²/ft)

Enumerate: Area per area

Item Name	Description
Length2_Length2	([m²/m²])
m2_m2	Square meter per square meter (m²/m²)
cm2_m2	Square centimeter per square meter (cm²/m²)
mm2_m2	Square millimeter per square meter (mm²/m²)
in2_m2	Square inch per square meter (in²/m²)
ft2_m2	Square foot per square meter (ft²/m²)
m2_in2	Square meter per square inch (m²/in²)
cm2_in2	Square centimeter per square inch (cm²/in²)
mm2_in2	Square millimeter per square inch (mm²/in²)
in2_in2	Square inch per square inch (in²/in²)
ft2_in2	Square foot per square inch (ft²/in²)
m2_ft2	Square meter per square foot (m²/ft²)
cm2_ft2	Square centimeter per square foot (cm²/ft²)
mm2_ft2	Square millimeter per square foot (mm²/ft²)
in2_ft2	Square inch per square foot (in²/ft²)
ft2_ft2	Square foot per square foot (ft²/ft²)

Enumerate: Percentage

Item Name	Description
pph	Percentage (%)
ppt	Per thousand (‰)

Enumerate: Angular

Item Name	Description
Deg	Degree (°)
Rad	Radian (rad)

Enumerate: Undefined

Item Name	Description
Undef	Undefined (?)

Enumerate: Dimensionless

Item Name	Description
NoUnits	Dimensionless ()

Enumerate: Area moment of inertia (length to the fourth)

Item Name	Description
Length4	([m⁴])
km4	Kilometer to the fourth (km⁴)
m4	Meter to the fourth (m⁴)
dm4	Decimeter to the fourth (dm⁴)
cm4	Centimeter to the fourth (cm⁴)
mm4	Millimeter to the fourth (mm⁴)
in4	Inch to the fourth (inch⁴)
ft4	Foot to the fourth (foot⁴)
yd4	Yard to the fourth (yard⁴)
mi4	Mile to the fourth (mile⁴)

Enumerate: Mass moment of inertia (mass times length squared)

Item Name	Description
MassxLength2	([kg·m²])
kgxm2	Kilogram square meter (kg·m²)
kgxcm2	Kilogram square centimeter (kg·cm²)
gxm2	Gram square meter (g·m²)
gxcm2	Gram square centimeter (g·cm²)
lbxin2	Pound square inch (lb·in²)
lbxft2	Pound square foot (lb·ft²)
tnxm2	Ton square meter (tn·m²)

Enumerate: Warping (length to the sixth)

Item Name	Description
Length6	([m⁶])
m6	Meter to the sixth (m⁶)
dm6	Decimeter to the sixth (dm⁶)
cm6	Centimeter to the sixth (cm⁶)
mm6	Millimeter to the sixth (mm⁶)
in6	Inch to the sixth (in⁶)
ft6	Foot to the sixth (ft⁶)

Enumerate: Warping stiffness

Item Name	Description
ForcexLenght3	([N·m³])
Nxm3	Newton cubic meter (N·m³)
kNxm3	KiloNewton cubic meter (kN·m³)
MNxm3	MegaNewton cubic meter (MN·m³)
lbfxin3	Pound cubic inch (lbf·in³)
kipxin3	Kip cubic inch (kip·in³)
lbfxft3	Pound cubic foot (lbf·ft³)
kpxm3	Kilopond cubic meter (kp·m³)
kpxcm3	Kilopond cubic centimeter (kp·cm³)
kpxmm3	Kilopond cubic millimeter (kp·mm³)
Mpxm3	Megapond cubic meter (Mp·m³)
Mpxcm3	Megapond cubic centimeter (Mp·cm³)
Mpxmm3	Megapond cubic millimeter (Mp·mm³)

Enumerate: Rotational velocity / Angular frequency

Item Name	Description
Angular_Time	([°/s])
rad_s	Radian per second (rad/s)
rad_min	Radian per minute (rad/min)
rad_h	Radian per hour (rad/h)

Enumerate: Inverse angular frequency

Item Name	Description
Time_Angular	([s/°])
s_rad	Second per radian (s/rad)
min_rad	Minute per radian (min/rad)
h_rad	Hour per radian (h/rad)

Enumerate: Rotational acceleration

Item Name	Description
Angular_Time2	([°/s²])
rad_s2	Radian per second squared (rad/s²)
rad_min2	Radian per minute squared (rad/min²)
rad_h2	Radian per hour squared (rad/h²)

Enumerate: Energy

Item Name	Description
Joule	Joule (J)
kJoule	kilojoule (kJ)
Cal	Calorie (Cal)
kCal	Kilocalorie (kCal)
BTU	British thermal unit (BTU)

Enumerate: Power

Item Name	Description
Energy_Time	([J/s])
Watt	Watt (W)
kWatt	Kilowatt (kW)
kCal_h	Kilocalorie per hour (kcal/h)
Cal_h	Calorie per hour (Cal/h)
Cal_s	Calorie per second (Cal/s)
BTU_h	BTU per hour (BTU/h)
BTU_s	BTU per second (BTU/s)

Enumerate: Power per unit area

Item Name	Description
Energy_Time_Area	([J/s/m²])
Watt_m2	Watt per square meter (W/m²)
kWatt_m2	Kilowatt per square meter (kW/m²)
kCal_h_m2	kCal per hour per square meter (kCal/(h·m²))
Cal_h_m2	Cal per hour per square meter (Cal/(h·m²))
BTU_h_in2	BTU per hour per square inch (BTU/(h·in²))
BTU_h_ft2	BTU per hour per square feet (BTU/(h·ft²))
BTU_s_in2	BTU per second per square inch (BTU/(s·in²))
BTU_s_ft2	BTU per second per square feet (BTU/(s·ft²))

Enumerate: Power per unit volume

Item Name	Description
Energy_Time_Volume	([J/s/m³])
Watt_m3	Watt per cubic meter (W/m³)
kWatt_m3	Kilowatt per cubic meter (kW/m³)
kCal_h_m3	kCal per hour per cubic meter (kCal/(h·m³))
Cal_h_m3	Cal per hour per cubic meter (Cal/(h·m³))
BTU_h_in3	BTU per hour per cubic inch (BTU/(h·in³))
BTU_h_ft3	BTU per hour per cubic feet (BTU/(h·ft³))
BTU_s_in3	BTU per second per cubic inch (BTU/(s·in³))
BTU_s_ft3	BTU per second per cubic feet (BTU/(s·ft³))

Enumerate: Heat transfer coefficient per length

Item Name	Description
Energy_Time_Length_TemperatureInc	([J/(s·m·ΔK)])
W_mxK	Watt per meter per degree Kelvin (W/(m·K))
kW_mxK	Kilowatt per meter per degree Kelvin (kW/(m·K))
W_mxC	Watt per meter per degree Celsius (W/(m·°C))
W_cmxC	Watt per centimeter per degree Celsius (W/(cm·°C))
Cal_s_cmxC	Calorie per second per centimeter per degree Celsius (cal/s/(cm·°C))
kCal_h_mxC	Kilocalorie per hour per meter per degree Celsius (kcal/h/(m·°C))
BTU_h_ftxF	BTU inch per hour per foot per degree Fahrenheit (BTU/h/(ft·°F))
BTU_s_ftxF	BTU per second foot degree Fahrenheit (BTU/s/(ft·°F))
BTU_h_inxF	BTU per hour inch degree Fahrenheit (BTU/h/(in·°F))

Enumerate: Heat transfer coefficient per area

Item Name	Description
Energy_Time_Area_TemperatureInc	([J/(s·m²·ΔK)])
W_m2xK	Watt per square meter per degree Kelvin (W/(m²·K))
kW_m2xK	Kilowatt per square meter per degree Kelvin (kW/(m²·K))
W_m2xC	Watt per meter square per degree Celsius (W/(m²·°C))
W_cm2xC	Watt per square centimeter per degree Celsius (W/(cm²·°C))
Cal_s_cm2xC	Calorie per second per square centimeter per degree Celsius (cal/s/(cm²·°C))
kCal_h_m2xC	Kilocalorie per hour per square meter per degree Celsius (kcal/h/(m²·°C))
BTU_h_ft2xF	BTU inch per hour per square foot per degree Fahrenheit (BTU/h/(ft²·°F))
BTU_s_ft2xF	BTU per second square foot degree Fahrenheit (BTU/s/(ft²·°F))
BTU_h_in2xF	BTU per hour square inch degree Fahrenheit (BTU/h/(in²·°F))

Enumerate: Specific heat

Item Name	Description
Energy_Mass_TemperatureInc	([J/(kg·ΔK)])
J_kgxK	Joule per kilogram per degree Kelvin (J/(kg·K))
J_kgxC	Joule per kilogram per degree Celsius (J/(kg·°C))
J_gxC	Joule per gram per degree Celsius (J/(g·°C))
kJ_kgxK	Kilojoule per kilogram per degree Kelvin (kJ/(kg·K))
kJ_kgxC	Kilojoule per kilogram per degree Celsius (kJ/(kg·°C))
Cal_gxC	Calorie per gram per degree Celsius (Cal/(g·°C))
Cal_gxF	Calorie per gram per degree Fahrenheit (cal/(g·°F))
kCal_kgxC	Kilocalorie per kilogram per degree Celsius (kcal/(kg·°C))
kCal_kgxK	Kilocalorie per kilogram per degree Kelvin (kcal/(kg·K))
BTU_lbxF	BTU per pound per degree Fahrenheit (BTU/(lb·°F))

Enumerate: Volumetric flow rate

Item Name	Description
Length3_time	([m³/s])
m3_s	Cubic meter per second (m³/s)
m3_h	Cubic meter per hour (m³/h)
m3_d	Cubic meter per day (m³/d)
mm3_h	Cubic millimeter per hour (mm³/h)
in3_s	Cubic inch per second (in³/s)
ft3_s	Cubic foot per second (ft³/s)

Enumerate: Flow per unit area

Item Name	Description
Length3_Time_Length2	([m³/s/m²])
m3_s_m2	Cubic meter per second per square meter (m³/s/m²)
m3_h_m2	Cubic meter per hour per square meter (m³/h/m²)
m3_d_m2	Cubic meter per day per square meter (m³/d/m²)
mm3_h_mm2	Cubic millimeter per hour per square millimeter (mm³/h/mm²)
in3_s_in2	Cubic inch per second per square inch (in³/s/in²)
ft3_s_ft2	Cubic foot per second per square foot (ft³/s/ft²)

Enumerate: Flow per unit volume

Item Name	Description
Length3_Time_Length3	([m³/s/m³])
m3_s_m3	Cubic meter per second per cubic meter (m³/s/m³)
m3_h_m3	Cubic meter per hour per cubic meter (m³/h/m³)
m3_d_m3	Cubic meter per day per cubic meter (m³/d/m³)
mm3_h_mm3	Cubic millimeter per hour per cubic millimeter (mm³/h/mm³)
in3_s_in3	Cubic inch per second per cubic inch (in³/s/in³)
ft3_s_ft3	Cubic foot per second per cubic foot (ft³/s/ft³)