Boundary conditions: Contextual

addCurveBC(entity, BCSEs, UX, UY)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.

addCurveBC(entity, BCSE, UX, UY)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.

addCurveBC(entity, BCSEs, UX, UY, UZ)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addCurveBC(entity, BCSE, UX, UY, UZ)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addCurveBC(entity, Name, BCSEs, UX, UY)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.

addCurveBC(entity, BCSEs, UX, UY, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, BCSEs, UX, UY, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, BCSEs, UX, UY, RotZ)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addCurveBC(entity, Name, BCSE, UX, UY)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.

addCurveBC(entity, BCSE, UX, UY, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, BCSE, UX, UY, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, BCSE, UX, UY, RotZ)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addCurveBC(entity, Name, BCSEs, UX, UY, UZ)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addCurveBC(entity, BCSEs, UX, UY, UZ, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, BCSEs, UX, UY, UZ, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSE, UX, UY, UZ)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addCurveBC(entity, BCSE, UX, UY, UZ, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, BCSE, UX, UY, UZ, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSEs, UX, UY, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSEs, UX, UY, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSEs, UX, UY, RotZ)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addCurveBC(entity, BCSEs, UX, UY, RotZ, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, BCSEs, UX, UY, RotZ, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSE, UX, UY, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSE, UX, UY, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSE, UX, UY, RotZ)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addCurveBC(entity, BCSE, UX, UY, RotZ, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, BCSE, UX, UY, RotZ, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSEs, UX, UY, UZ, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSEs, UX, UY, UZ, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSE, UX, UY, UZ, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSE, UX, UY, UZ, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSEs, UX, UY, RotZ, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSEs, UX, UY, RotZ, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSE, UX, UY, RotZ, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSE, UX, UY, RotZ, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, BCSEs, UX, UY, UZ, RotX, RotY, RotZ)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addCurveBC(entity, BCSE, UX, UY, UZ, RotX, RotY, RotZ)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addCurveBC(entity, Name, BCSEs, UX, UY, UZ, RotX, RotY, RotZ)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addCurveBC(entity, BCSEs, UX, UY, UZ, RotX, RotY, RotZ, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, BCSEs, UX, UY, UZ, RotX, RotY, RotZ, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSE, UX, UY, UZ, RotX, RotY, RotZ)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addCurveBC(entity, BCSE, UX, UY, UZ, RotX, RotY, RotZ, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, BCSE, UX, UY, UZ, RotX, RotY, RotZ, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSEs, UX, UY, UZ, RotX, RotY, RotZ, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSEs, UX, UY, UZ, RotX, RotY, RotZ, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSE, UX, UY, UZ, RotX, RotY, RotZ, Lines)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveBC(entity, Name, BCSE, UX, UY, UZ, RotX, RotY, RotZ, Line)

Linear: Add a linear boundary condition to the group

Alias: addCBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveDisplacement(entity, BCSEs, Dir, Displacement)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addCurveDisplacement(entity, BCSE, Dir, Displacement)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addCurveDisplacement(entity, Name, BCSEs, Dir, Displacement)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addCurveDisplacement(entity, BCSEs, Dir, Displacement, Lines)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveDisplacement(entity, BCSEs, Dir, Displacement, Line)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveDisplacement(entity, Name, BCSE, Dir, Displacement)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addCurveDisplacement(entity, BCSE, Dir, Displacement, Lines)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveDisplacement(entity, BCSE, Dir, Displacement, Line)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveDisplacement(entity, BCSEs, Dir, Displacement, Phase)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addCurveDisplacement(entity, BCSE, Dir, Displacement, Phase)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addCurveDisplacement(entity, Name, BCSEs, Dir, Displacement, Lines)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveDisplacement(entity, Name, BCSEs, Dir, Displacement, Line)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveDisplacement(entity, Name, BCSE, Dir, Displacement, Lines)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveDisplacement(entity, Name, BCSE, Dir, Displacement, Line)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveDisplacement(entity, Name, BCSEs, Dir, Displacement, Phase)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addCurveDisplacement(entity, BCSEs, Dir, Displacement, Lines, Phase)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addCurveDisplacement(entity, BCSEs, Dir, Displacement, Line, Phase)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addCurveDisplacement(entity, Name, BCSE, Dir, Displacement, Phase)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addCurveDisplacement(entity, BCSE, Dir, Displacement, Lines, Phase)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addCurveDisplacement(entity, BCSE, Dir, Displacement, Line, Phase)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addCurveDisplacement(entity, Name, BCSEs, Dir, Displacement, Lines, Phase)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addCurveDisplacement(entity, Name, BCSEs, Dir, Displacement, Line, Phase)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addCurveDisplacement(entity, Name, BCSE, Dir, Displacement, Lines, Phase)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addCurveDisplacement(entity, Name, BCSE, Dir, Displacement, Line, Phase)

Displacement on line: Add a displacement on a line to the group

Alias: addCDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addCurveFilmBC(entity, BCSE, AmbientTemperature, Film, Emissivity)

Film coefficient on curve: Add a film coefficient on a curve to the group

Alias: addCFIBC

Constraints: 2 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
Film (Double) – h: Film coefficient.
Emissivity (Double) – ε: Emissivity.

addCurveFilmBC(entity, Name, BCSE, AmbientTemperature, Film, Emissivity)

Film coefficient on curve: Add a film coefficient on a curve to the group

Alias: addCFIBC

Constraints: 2 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
Film (Double) – h: Film coefficient.
Emissivity (Double) – ε: Emissivity.

addCurveFilmBC(entity, BCSE, AmbientTemperature, Film, Emissivity, Lines)

Film coefficient on curve: Add a film coefficient on a curve to the group

Alias: addCFIBC

Constraints: 2 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
Film (Double) – h: Film coefficient.
Emissivity (Double) – ε: Emissivity.
Lines (List) – Lines: Lines where the boundary conditions are applied.

addCurveFilmBC(entity, BCSE, AmbientTemperature, Film, Line, Emissivity)

Film coefficient on curve: Add a film coefficient on a curve to the group

Alias: addCFIBC

Constraints: 2 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
Film (Double) – h: Film coefficient.
Line (Entity) – Line: Line where the boundary conditions are applied.
Emissivity (Double) – ε: Emissivity.

addCurveFilmBC(entity, Name, BCSE, AmbientTemperature, Film, Emissivity, Lines)

Film coefficient on curve: Add a film coefficient on a curve to the group

Alias: addCFIBC

Constraints: 2 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
Film (Double) – h: Film coefficient.
Emissivity (Double) – ε: Emissivity.
Lines (List) – Lines: Lines where the boundary conditions are applied.

addCurveFilmBC(entity, Name, BCSE, AmbientTemperature, Film, Emissivity, Line)

Film coefficient on curve: Add a film coefficient on a curve to the group

Alias: addCFIBC

Constraints: 2 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
Film (Double) – h: Film coefficient.
Emissivity (Double) – ε: Emissivity.
Line (Entity) – Line: Line where the boundary conditions are applied.

addCurveFluxBC(entity, BCSE, Flux)

Flux on curve: Add a thermal flux on a curve to the group

Alias: addCFLBC

Constraints: 2 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.

addCurveFluxBC(entity, BCSE, HydraulicFlux)

Flux on curve: Add a thermal flux on a curve to the group

Alias: addCFLBC

Constraints: 2 dimensions, Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
HydraulicFlux (Double) – Hydraulic flux.

addCurveFluxBC(entity, Name, BCSE, Flux)

Flux on curve: Add a thermal flux on a curve to the group

Alias: addCFLBC

Constraints: 2 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.

addCurveFluxBC(entity, BCSE, Flux, Lines)

Flux on curve: Add a thermal flux on a curve to the group

Alias: addCFLBC

Constraints: 2 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
Lines (List) – Lines: Lines where the boundary conditions are applied.

addCurveFluxBC(entity, BCSE, Flux, Line)

Flux on curve: Add a thermal flux on a curve to the group

Alias: addCFLBC

Constraints: 2 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
Line (Entity) – Line: Line where the boundary conditions are applied.

addCurveFluxBC(entity, Name, BCSE, HydraulicFlux)

Flux on curve: Add a thermal flux on a curve to the group

Alias: addCFLBC

Constraints: 2 dimensions, Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
HydraulicFlux (Double) – Hydraulic flux.

addCurveFluxBC(entity, BCSE, HydraulicFlux, Lines)

Flux on curve: Add a thermal flux on a curve to the group

Alias: addCFLBC

Constraints: 2 dimensions, Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
HydraulicFlux (Double) – Hydraulic flux.
Lines (List) – Lines: Lines where the boundary conditions are applied.

addCurveFluxBC(entity, BCSE, HydraulicFlux, Line)

Flux on curve: Add a thermal flux on a curve to the group

Alias: addCFLBC

Constraints: 2 dimensions, Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
HydraulicFlux (Double) – Hydraulic flux.
Line (Entity) – Line: Line where the boundary conditions are applied.

addCurveFluxBC(entity, Name, BCSE, Flux, Lines)

Flux on curve: Add a thermal flux on a curve to the group

Alias: addCFLBC

Constraints: 2 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
Lines (List) – Lines: Lines where the boundary conditions are applied.

addCurveFluxBC(entity, Name, BCSE, Flux, Line)

Flux on curve: Add a thermal flux on a curve to the group

Alias: addCFLBC

Constraints: 2 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
Line (Entity) – Line: Line where the boundary conditions are applied.

addCurveFluxBC(entity, Name, BCSE, HydraulicFlux, Lines)

Flux on curve: Add a thermal flux on a curve to the group

Alias: addCFLBC

Constraints: 2 dimensions, Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
HydraulicFlux (Double) – Hydraulic flux.
Lines (List) – Lines: Lines where the boundary conditions are applied.

addCurveFluxBC(entity, Name, BCSE, HydraulicFlux, Line)

Flux on curve: Add a thermal flux on a curve to the group

Alias: addCFLBC

Constraints: 2 dimensions, Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (Entity) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
HydraulicFlux (Double) – Hydraulic flux.
Line (Entity) – Line: Line where the boundary conditions are applied.

addCurveTemperatureBC(entity, BCSE, Temperature)

Temperature on curve: Add a temperature on a curve to the group

Alias: addCTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.

addCurveTemperatureBC(entity, Name, BCSE, Temperature)

Temperature on curve: Add a temperature on a curve to the group

Alias: addCTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.

addCurveTemperatureBC(entity, BCSE, Temperature, Lines)

Temperature on curve: Add a temperature on a curve to the group

Alias: addCTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveTemperatureBC(entity, BCSE, Temperature, Line)

Temperature on curve: Add a temperature on a curve to the group

Alias: addCTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveTemperatureBC(entity, Name, BCSE, Temperature, Lines)

Temperature on curve: Add a temperature on a curve to the group

Alias: addCTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveTemperatureBC(entity, Name, BCSE, Temperature, Line)

Temperature on curve: Add a temperature on a curve to the group

Alias: addCTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveTotalHeadBC(entity, BCSE, TotalHead)

Total head on curve: Add a total head on a curve to the group

Alias: addCTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.

addCurveTotalHeadBC(entity, Name, BCSE, TotalHead)

Total head on curve: Add a total head on a curve to the group

Alias: addCTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.

addCurveTotalHeadBC(entity, BCSE, TotalHead, Lines)

Total head on curve: Add a total head on a curve to the group

Alias: addCTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveTotalHeadBC(entity, BCSE, TotalHead, Line)

Total head on curve: Add a total head on a curve to the group

Alias: addCTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveTotalHeadBC(entity, Name, BCSE, TotalHead, Lines)

Total head on curve: Add a total head on a curve to the group

Alias: addCTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.
Lines (List) – Lines: Lines where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addCurveTotalHeadBC(entity, Name, BCSE, TotalHead, Line)

Total head on curve: Add a total head on a curve to the group

Alias: addCTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.
Line (POCCGeomLine) – Line: Line where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addFluxBCByNodes(entity, BCGroup, Flux)

Nodal flux: Apply thermal flux on nodes

Alias: addNFluxBCByNodes

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCGroup (BCGroupStructural) – Boundary conditions group. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.

addFluxBCByNodes(entity, BCGroup, Name, Flux)

Nodal flux: Apply thermal flux on nodes

Alias: addNFluxBCByNodes

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCGroup (BCGroupStructural) – Boundary conditions group. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Name (str) – Name. Conditions: “” input must be non-empty.
Flux (Double) – Thermal flux.

addNodalBC(entity, UX, UY, RotZ, Nodes)

Nodal: Add a boundary condition on nodes to the group

Alias: addNBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Nodes (PVectorConst) – Nodes: List with the nodes where the boundary condition is applied. Conditions: “” does not exist in the dropdown list.

addNodalBC(entity, UX, UY, RotZ, SelectionGroup)

Nodal: Add a boundary condition on nodes to the group

Alias: addNBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
SelectionGroup (Entity) – Selection group: Selectin group to select entities. Conditions: “” does not exist in the dropdown list.

addNodalBC(entity, Name, UX, UY, RotZ, Nodes)

Nodal: Add a boundary condition on nodes to the group

Alias: addNBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Nodes (PVectorConst) – Nodes: List with the nodes where the boundary condition is applied. Conditions: “” does not exist in the dropdown list.

addNodalBC(entity, Name, UX, UY, RotZ, SelectionGroup)

Nodal: Add a boundary condition on nodes to the group

Alias: addNBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
SelectionGroup (Entity) – Selection group: Selectin group to select entities. Conditions: “” does not exist in the dropdown list.

addNodalBC(entity, UX, UY, UZ, RotX, RotY, RotZ, Nodes)

Nodal: Add a boundary condition on nodes to the group

Alias: addNBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Nodes (PVectorConst) – Nodes: List with the nodes where the boundary condition is applied. Conditions: “” does not exist in the dropdown list.

addNodalBC(entity, UX, UY, UZ, RotX, RotY, RotZ, SelectionGroup)

Nodal: Add a boundary condition on nodes to the group

Alias: addNBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
SelectionGroup (Entity) – Selection group: Selectin group to select entities. Conditions: “” does not exist in the dropdown list.

addNodalBC(entity, Name, UX, UY, UZ, RotX, RotY, RotZ, Nodes)

Nodal: Add a boundary condition on nodes to the group

Alias: addNBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Nodes (PVectorConst) – Nodes: List with the nodes where the boundary condition is applied. Conditions: “” does not exist in the dropdown list.

addNodalBC(entity, Name, UX, UY, UZ, RotX, RotY, RotZ, SelectionGroup)

Nodal: Add a boundary condition on nodes to the group

Alias: addNBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
SelectionGroup (Entity) – Selection group: Selectin group to select entities. Conditions: “” does not exist in the dropdown list.

addNodalBCByNodes(entity, BCGroup, UX, UY, RotZ)

Nodal constrain: Apply nodal constrain

Alias: addNBCN

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCGroup (BCGroupStructural) – Boundary conditions group. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addNodalBCByNodes(entity, BCGroup, Name, UX, UY, RotZ)

Nodal constrain: Apply nodal constrain

Alias: addNBCN

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCGroup (BCGroupStructural) – Boundary conditions group. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Name (str) – Name. Conditions: “” input must be non-empty.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addNodalBCByNodes(entity, BCGroup, UX, UY, UZ, RotX, RotY, RotZ)

Nodal constrain: Apply nodal constrain

Alias: addNBCN

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCGroup (BCGroupStructural) – Boundary conditions group. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addNodalBCByNodes(entity, BCGroup, Name, UX, UY, UZ, RotX, RotY, RotZ)

Nodal constrain: Apply nodal constrain

Alias: addNBCN

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCGroup (BCGroupStructural) – Boundary conditions group. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Name (str) – Name. Conditions: “” input must be non-empty.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addNodalDispBC(entity, Dir, Displacement, Nodes)

Nodal displacement: Add a displacement on nodes to the group

Alias: addNDispBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Nodes (PVectorConst) – Nodes: List with the nodes where the boundary condition is applied. Conditions: “” does not exist in the dropdown list.

addNodalDispBC(entity, Dir, Displacement, SelectionGroup)

Nodal displacement: Add a displacement on nodes to the group

Alias: addNDispBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
SelectionGroup (Entity) – Selection group: Selectin group to select entities. Conditions: “” does not exist in the dropdown list.

addNodalDispBC(entity, Name, Dir, Displacement, Nodes)

Nodal displacement: Add a displacement on nodes to the group

Alias: addNDispBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Nodes (PVectorConst) – Nodes: List with the nodes where the boundary condition is applied. Conditions: “” does not exist in the dropdown list.

addNodalDispBC(entity, Name, Dir, Displacement, SelectionGroup)

Nodal displacement: Add a displacement on nodes to the group

Alias: addNDispBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
SelectionGroup (Entity) – Selection group: Selectin group to select entities. Conditions: “” does not exist in the dropdown list.

addNodalDispBC(entity, Dir, Displacement, Phase, Nodes)

Nodal displacement: Add a displacement on nodes to the group

Alias: addNDispBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.
Nodes (PVectorConst) – Nodes: List with the nodes where the boundary condition is applied. Conditions: “” does not exist in the dropdown list.

addNodalDispBC(entity, Dir, Displacement, Phase, SelectionGroup)

Nodal displacement: Add a displacement on nodes to the group

Alias: addNDispBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.
SelectionGroup (Entity) – Selection group: Selectin group to select entities. Conditions: “” does not exist in the dropdown list.

addNodalDispBC(entity, Name, Dir, Displacement, Phase, Nodes)

Nodal displacement: Add a displacement on nodes to the group

Alias: addNDispBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.
Nodes (PVectorConst) – Nodes: List with the nodes where the boundary condition is applied. Conditions: “” does not exist in the dropdown list.

addNodalDispBC(entity, Name, Dir, Displacement, Phase, SelectionGroup)

Nodal displacement: Add a displacement on nodes to the group

Alias: addNDispBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.
SelectionGroup (Entity) – Selection group: Selectin group to select entities. Conditions: “” does not exist in the dropdown list.

addNodalDispBCByNodes(entity, BCGroup, Dir, Displacement)

Nodal displacement: Apply displacement on nodes

Alias: addNDispBCByNodes

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCGroup (BCGroupStructural) – Boundary conditions group. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addNodalDispBCByNodes(entity, BCGroup, Name, Dir, Displacement)

Nodal displacement: Apply displacement on nodes

Alias: addNDispBCByNodes

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCGroup (BCGroupStructural) – Boundary conditions group. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Name (str) – Name. Conditions: “” input must be non-empty.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addNodalDispBCByNodes(entity, BCGroup, Dir, Displacement, Phase)

Nodal displacement: Apply displacement on nodes

Alias: addNDispBCByNodes

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCGroup (BCGroupStructural) – Boundary conditions group. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addNodalDispBCByNodes(entity, BCGroup, Name, Dir, Displacement, Phase)

Nodal displacement: Apply displacement on nodes

Alias: addNDispBCByNodes

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCGroup (BCGroupStructural) – Boundary conditions group. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Name (str) – Name. Conditions: “” input must be non-empty.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addNodalTempBC(entity, Temperature, Nodes)

Nodal temperature: Add a temperature on nodes to the boundary condition group

Alias: addNTempBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Temperature (Double) – Temperature.
Nodes (PVectorConst) – Nodes: List with the nodes where the boundary condition is applied. Conditions: “” does not exist in the dropdown list.

addNodalTempBC(entity, Temperature, SelectionGroup)

Nodal temperature: Add a temperature on nodes to the boundary condition group

Alias: addNTempBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Temperature (Double) – Temperature.
SelectionGroup (Entity) – Selection group: Selectin group to select entities. Conditions: “” does not exist in the dropdown list.

addNodalTempBC(entity, Name, Temperature, Nodes)

Nodal temperature: Add a temperature on nodes to the boundary condition group

Alias: addNTempBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
Temperature (Double) – Temperature.
Nodes (PVectorConst) – Nodes: List with the nodes where the boundary condition is applied. Conditions: “” does not exist in the dropdown list.

addNodalTempBC(entity, Name, Temperature, SelectionGroup)

Nodal temperature: Add a temperature on nodes to the boundary condition group

Alias: addNTempBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
Temperature (Double) – Temperature.
SelectionGroup (Entity) – Selection group: Selectin group to select entities. Conditions: “” does not exist in the dropdown list.

addNodalTotalHeadBC(entity, TotalHead, Nodes)

Nodal total head: Add a nodal total head to the group

Alias: addNTotalHeadBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
TotalHead (Double) – Total head.
Nodes (PVectorConst) – Nodes: List with the nodes where the boundary condition is applied. Conditions: “” does not exist in the dropdown list.

addNodalTotalHeadBC(entity, TotalHead, SelectionGroup)

Nodal total head: Add a nodal total head to the group

Alias: addNTotalHeadBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
TotalHead (Double) – Total head.
SelectionGroup (Entity) – Selection group: Selectin group to select entities. Conditions: “” does not exist in the dropdown list.

addNodalTotalHeadBC(entity, Name, TotalHead, Nodes)

Nodal total head: Add a nodal total head to the group

Alias: addNTotalHeadBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
TotalHead (Double) – Total head.
Nodes (PVectorConst) – Nodes: List with the nodes where the boundary condition is applied. Conditions: “” does not exist in the dropdown list.

addNodalTotalHeadBC(entity, Name, TotalHead, SelectionGroup)

Nodal total head: Add a nodal total head to the group

Alias: addNTotalHeadBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
TotalHead (Double) – Total head.
SelectionGroup (Entity) – Selection group: Selectin group to select entities. Conditions: “” does not exist in the dropdown list.

addPointBC(entity, BCSE, Point, UX, UY)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.

addPointBC(entity, BCSE, Points, UX, UY)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.

addPointBC(entity, BCSE, Point, UX, UY, UZ)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addPointBC(entity, BCSE, Points, UX, UY, UZ)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addPointBC(entity, BCSE, Point, UX, UY, RotZ)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addPointBC(entity, BCSE, Points, UX, UY, RotZ)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addPointBC(entity, Name, BCSE, Point, UX, UY)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.

addPointBC(entity, Name, BCSE, Points, UX, UY)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.

addPointBC(entity, Name, BCSE, Point, UX, UY, UZ)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addPointBC(entity, Name, BCSE, Points, UX, UY, UZ)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addPointBC(entity, Name, BCSE, Point, UX, UY, RotZ)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addPointBC(entity, Name, BCSE, Points, UX, UY, RotZ)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 2 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addPointBC(entity, BCSE, Point, UX, UY, UZ, RotX, RotY, RotZ)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addPointBC(entity, BCSE, Points, UX, UY, UZ, RotX, RotY, RotZ)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addPointBC(entity, Name, BCSE, Point, UX, UY, UZ, RotX, RotY, RotZ)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addPointBC(entity, Name, BCSE, Points, UX, UY, UZ, RotX, RotY, RotZ)

Point: Add a point boundary condition to the group

Alias: addPBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addPointDispBC(entity, BCSE, Points, Dir, Displacement)

Point displacement: Add a point displacement to the group

Alias: addPDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addPointDispBC(entity, BCSE, Point, Dir, Displacement)

Point displacement: Add a point displacement to the group

Alias: addPDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addPointDispBC(entity, Name, BCSE, Points, Dir, Displacement)

Point displacement: Add a point displacement to the group

Alias: addPDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addPointDispBC(entity, Name, BCSE, Point, Dir, Displacement)

Point displacement: Add a point displacement to the group

Alias: addPDBC

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addPointDispBC(entity, BCSE, Points, Dir, Displacement, Phase)

Point displacement: Add a point displacement to the group

Alias: addPDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addPointDispBC(entity, BCSE, Point, Dir, Displacement, Phase)

Point displacement: Add a point displacement to the group

Alias: addPDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addPointDispBC(entity, Name, BCSE, Points, Dir, Displacement, Phase)

Point displacement: Add a point displacement to the group

Alias: addPDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addPointDispBC(entity, Name, BCSE, Point, Dir, Displacement, Phase)

Point displacement: Add a point displacement to the group

Alias: addPDBC

Constraints: Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addPointFluxBC(entity, BCSE, Points, Flux)

Point flux: Add a point thermal flux to the group

Alias: addPFBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
Flux (Double) – Thermal flux.

addPointFluxBC(entity, BCSE, Point, Flux)

Point flux: Add a point thermal flux to the group

Alias: addPFBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
Flux (Double) – Thermal flux.

addPointFluxBC(entity, BCSE, Points, HydraulicFlux)

Point flux: Add a point thermal flux to the group

Alias: addPFBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
HydraulicFlux (Double) – Hydraulic flux.

addPointFluxBC(entity, BCSE, Point, HydraulicFlux)

Point flux: Add a point thermal flux to the group

Alias: addPFBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
HydraulicFlux (Double) – Hydraulic flux.

addPointFluxBC(entity, Name, BCSE, Points, Flux)

Point flux: Add a point thermal flux to the group

Alias: addPFBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
Flux (Double) – Thermal flux.

addPointFluxBC(entity, Name, BCSE, Point, Flux)

Point flux: Add a point thermal flux to the group

Alias: addPFBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
Flux (Double) – Thermal flux.

addPointFluxBC(entity, Name, BCSE, Points, HydraulicFlux)

Point flux: Add a point thermal flux to the group

Alias: addPFBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
HydraulicFlux (Double) – Hydraulic flux.

addPointFluxBC(entity, Name, BCSE, Point, HydraulicFlux)

Point flux: Add a point thermal flux to the group

Alias: addPFBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
HydraulicFlux (Double) – Hydraulic flux.

addPointTemperatureBC(entity, BCSE, Point, Temperature)

Point temperature: Add a point temperature to the group

Alias: addPTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
Temperature (Double) – Temperature.

addPointTemperatureBC(entity, BCSE, Points, Temperature)

Point temperature: Add a point temperature to the group

Alias: addPTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
Temperature (Double) – Temperature.

addPointTemperatureBC(entity, Name, BCSE, Points, Temperature)

Point temperature: Add a point temperature to the group

Alias: addPTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
Temperature (Double) – Temperature.

addPointTemperatureBC(entity, Name, BCSE, Point, Temperature)

Point temperature: Add a point temperature to the group

Alias: addPTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
Temperature (Double) – Temperature.

addPointTotalHeadBC(entity, BCSE, Point, TotalHead)

Point total head: Add a point total head to the group

Alias: addPTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
TotalHead (Double) – Total head.

addPointTotalHeadBC(entity, BCSE, Points, TotalHead)

Point total head: Add a point total head to the group

Alias: addPTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
TotalHead (Double) – Total head.

addPointTotalHeadBC(entity, Name, BCSE, Points, TotalHead)

Point total head: Add a point total head to the group

Alias: addPTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Points (List) – Points: Application points of boundary condition.
TotalHead (Double) – Total head.

addPointTotalHeadBC(entity, Name, BCSE, Point, TotalHead)

Point total head: Add a point total head to the group

Alias: addPTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Point (Point) – Point.
TotalHead (Double) – Total head.

addSurfaceBC(entity, BCSEs, UX, UY, UZ)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addSurfaceBC(entity, BCSEs, UX, UY, UZ)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addSurfaceBC(entity, BCSE, UX, UY, UZ)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addSurfaceBC(entity, BCSE, UX, UY, UZ)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addSurfaceBC(entity, Name, BCSEs, UX, UY, UZ)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addSurfaceBC(entity, Name, BCSEs, UX, UY, UZ)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addSurfaceBC(entity, BCSEs, UX, UY, UZ, Surfaces)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, BCSEs, UX, UY, UZ, Surface)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, Name, BCSE, UX, UY, UZ)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addSurfaceBC(entity, Name, BCSE, UX, UY, UZ)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.

addSurfaceBC(entity, BCSE, UX, UY, UZ, Surfaces)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, BCSE, UX, UY, UZ, Surface)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, Name, BCSEs, UX, UY, UZ, Surfaces)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, Name, BCSEs, UX, UY, UZ, Surface)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, Name, BCSE, UX, UY, UZ, Surfaces)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, Name, BCSE, UX, UY, UZ, Surface)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, BCSEs, UX, UY, UZ, RotX, RotY, RotZ)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addSurfaceBC(entity, BCSE, UX, UY, UZ, RotX, RotY, RotZ)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addSurfaceBC(entity, Name, BCSEs, UX, UY, UZ, RotX, RotY, RotZ)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addSurfaceBC(entity, BCSEs, UX, UY, UZ, RotX, RotY, RotZ, Surfaces)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, BCSEs, UX, UY, UZ, RotX, RotY, RotZ, Surface)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, Name, BCSE, UX, UY, UZ, RotX, RotY, RotZ)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.

addSurfaceBC(entity, BCSE, UX, UY, UZ, RotX, RotY, RotZ, Surfaces)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, BCSE, UX, UY, UZ, RotX, RotY, RotZ, Surface)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, Name, BCSEs, UX, UY, UZ, RotX, RotY, RotZ, Surfaces)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, Name, BCSEs, UX, UY, UZ, RotX, RotY, RotZ, Surface)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, Name, BCSE, UX, UY, UZ, RotX, RotY, RotZ, Surfaces)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceBC(entity, Name, BCSE, UX, UY, UZ, RotX, RotY, RotZ, Surface)

Surface: Add a surface boundary condition to the group

Alias: addSBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
UX (bool) – Constrain mov. X: Constrain X movement.
UY (bool) – Constrain mov. Y: Constrain Y movement.
UZ (bool) – Constrain mov. Z: Constrain Z movement.
RotX (bool) – Constrain rot. X: Constrain rotation about X axis.
RotY (bool) – Constrain rot. Y: Constrain rotation about Y axis.
RotZ (bool) – Constrain rot. Z: Constrain rotation about Z axis.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceDisplacement(entity, BCSEs, Dir, Displacement)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addSurfaceDisplacement(entity, BCSE, Dir, Displacement)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addSurfaceDisplacement(entity, Name, BCSEs, Dir, Displacement)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addSurfaceDisplacement(entity, BCSEs, Dir, Displacement, Surfaces)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceDisplacement(entity, BCSEs, Dir, Displacement, Surface)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceDisplacement(entity, Name, BCSE, Dir, Displacement)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.

addSurfaceDisplacement(entity, BCSE, Dir, Displacement, Surfaces)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceDisplacement(entity, BCSE, Dir, Displacement, Surface)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceDisplacement(entity, BCSEs, Dir, Displacement, Phase)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions, Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addSurfaceDisplacement(entity, BCSE, Dir, Displacement, Phase)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions, Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addSurfaceDisplacement(entity, Name, BCSEs, Dir, Displacement, Surfaces)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceDisplacement(entity, Name, BCSEs, Dir, Displacement, Surface)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceDisplacement(entity, Name, BCSE, Dir, Displacement, Surfaces)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceDisplacement(entity, Name, BCSE, Dir, Displacement, Surface)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceDisplacement(entity, Name, BCSEs, Dir, Displacement, Phase)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions, Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addSurfaceDisplacement(entity, BCSEs, Dir, Displacement, Surfaces, Phase)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions, Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addSurfaceDisplacement(entity, BCSEs, Dir, Displacement, Surface, Phase)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions, Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addSurfaceDisplacement(entity, Name, BCSE, Dir, Displacement, Phase)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions, Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Phase – Phase.

addSurfaceDisplacement(entity, BCSE, Dir, Displacement, Surfaces, Phase)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions, Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addSurfaceDisplacement(entity, BCSE, Dir, Displacement, Surface, Phase)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions, Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addSurfaceDisplacement(entity, Name, BCSEs, Dir, Displacement, Surfaces, Phase)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions, Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addSurfaceDisplacement(entity, Name, BCSEs, Dir, Displacement, Surface, Phase)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions, Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSEs (List) – Structural elements: Structural elements in which the boundary condition is applied. Conditions: “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addSurfaceDisplacement(entity, Name, BCSE, Dir, Displacement, Surfaces, Phase)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions, Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addSurfaceDisplacement(entity, Name, BCSE, Dir, Displacement, Surface, Phase)

Displacement on surface: Add a displacement on a surface to the group

Alias: addSDBC

Constraints: 3 dimensions, Harmonic analysis

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Dir (Vector) – Direction: Displacement direction. Conditions: A vector cannot have zero magnitude.
Displacement (Double) – Displacement: Displacement magnitude. Conditions: Displacement can not be null.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.
Phase – Phase.

addSurfaceFilm(entity, BCSE, AmbientTemperature, Film, Emissivity)

Film coefficient on surface: Add a film coefficient on a surface to the group

Alias: addSFIBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
Film (Double) – h: Film coefficient.
Emissivity (Double) – ε: Emissivity.

addSurfaceFilm(entity, Name, BCSE, AmbientTemperature, Film, Emissivity)

Film coefficient on surface: Add a film coefficient on a surface to the group

Alias: addSFIBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
Film (Double) – h: Film coefficient.
Emissivity (Double) – ε: Emissivity.

addSurfaceFilm(entity, Name, BCSE, AmbientTemperature, FilmTop, FilmBot)

Film coefficient on surface: Add a film coefficient on a surface to the group

Alias: addSFIBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
FilmTop (Double) – h top: Film coefficient on top face.
FilmBot (Double) – h bot: Film coefficient on bottom.

addSurfaceFilm(entity, BCSE, AmbientTemperature, Film, Emissivity, Surfaces)

Film coefficient on surface: Add a film coefficient on a surface to the group

Alias: addSFIBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
Film (Double) – h: Film coefficient.
Emissivity (Double) – ε: Emissivity.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFilm(entity, BCSE, AmbientTemperature, Film, Emissivity, Surface)

Film coefficient on surface: Add a film coefficient on a surface to the group

Alias: addSFIBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
Film (Double) – h: Film coefficient.
Emissivity (Double) – ε: Emissivity.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFilm(entity, Name, BCSE, AmbientTemperature, Film, Emissivity, Surfaces)

Film coefficient on surface: Add a film coefficient on a surface to the group

Alias: addSFIBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
Film (Double) – h: Film coefficient.
Emissivity (Double) – ε: Emissivity.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFilm(entity, Name, BCSE, AmbientTemperature, Film, Emissivity, Surface)

Film coefficient on surface: Add a film coefficient on a surface to the group

Alias: addSFIBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
Film (Double) – h: Film coefficient.
Emissivity (Double) – ε: Emissivity.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFilm(entity, Name, BCSE, AmbientTemperature, FilmTop, FilmBot, Surfaces)

Film coefficient on surface: Add a film coefficient on a surface to the group

Alias: addSFIBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
FilmTop (Double) – h top: Film coefficient on top face.
FilmBot (Double) – h bot: Film coefficient on bottom.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFilm(entity, Name, BCSE, AmbientTemperature, FilmTop, FilmBot, Surface)

Film coefficient on surface: Add a film coefficient on a surface to the group

Alias: addSFIBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
FilmTop (Double) – h top: Film coefficient on top face.
FilmBot (Double) – h bot: Film coefficient on bottom.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFilm(entity, BCSE, AmbientTemperature, FilmTop, FilmBot, EmissivityTop, EmissivityBot)

Film coefficient on surface: Add a film coefficient on a surface to the group

Alias: addSFIBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
FilmTop (Double) – h top: Film coefficient on top face.
FilmBot (Double) – h bot: Film coefficient on bottom.
EmissivityTop (Double) – ε top: Emissivity on top.
EmissivityBot (Double) – ε bot: Emissivity on bottom.

addSurfaceFilm(entity, BCSE, AmbientTemperature, FilmTop, FilmBot, EmissivityTop, EmissivityBot, Surfaces)

Film coefficient on surface: Add a film coefficient on a surface to the group

Alias: addSFIBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
FilmTop (Double) – h top: Film coefficient on top face.
FilmBot (Double) – h bot: Film coefficient on bottom.
EmissivityTop (Double) – ε top: Emissivity on top.
EmissivityBot (Double) – ε bot: Emissivity on bottom.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFilm(entity, BCSE, AmbientTemperature, FilmTop, FilmBot, EmissivityTop, EmissivityBot, Surface)

Film coefficient on surface: Add a film coefficient on a surface to the group

Alias: addSFIBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
AmbientTemperature (Double) – Ambient temperature.
FilmTop (Double) – h top: Film coefficient on top face.
FilmBot (Double) – h bot: Film coefficient on bottom.
EmissivityTop (Double) – ε top: Emissivity on top.
EmissivityBot (Double) – ε bot: Emissivity on bottom.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, BCSE, Flux)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.

addSurfaceFlux(entity, BCSE, Flux)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.

addSurfaceFlux(entity, Name, BCSE, Flux)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.

addSurfaceFlux(entity, BCSE, Flux, Surfaces)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, BCSE, Flux, Surface)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, Name, BCSE, Flux)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.

addSurfaceFlux(entity, BCSE, Flux, Surfaces)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, BCSE, Flux, Surface)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, Name, BCSE, Flux, Surfaces)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, Name, BCSE, Flux, Surface)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, BCSE, Flux, FluxTop, FluxBot)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
FluxTop (Double) – Normal flux on top.
FluxBot (Double) – Normal flux on bottom.

addSurfaceFlux(entity, Name, BCSE, Flux, Surfaces)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, Name, BCSE, Flux, Surface)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, BCSE, Flux, FluxTop, FluxBot)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.
FluxTop – Normal flux on top.
FluxBot – Normal flux on bottom.

addSurfaceFlux(entity, Name, BCSE, Flux, FluxTop, FluxBot)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
FluxTop (Double) – Normal flux on top.
FluxBot (Double) – Normal flux on bottom.

addSurfaceFlux(entity, BCSE, Flux, FluxTop, FluxBot, Surfaces)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
FluxTop (Double) – Normal flux on top.
FluxBot (Double) – Normal flux on bottom.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, BCSE, Flux, FluxTop, FluxBot, Surface)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
FluxTop (Double) – Normal flux on top.
FluxBot (Double) – Normal flux on bottom.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, Name, BCSE, Flux, FluxTop, FluxBot)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.
FluxTop – Normal flux on top.
FluxBot – Normal flux on bottom.

addSurfaceFlux(entity, BCSE, Flux, FluxTop, FluxBot, Surfaces)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.
FluxTop – Normal flux on top.
FluxBot – Normal flux on bottom.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, BCSE, Flux, FluxTop, FluxBot, Surface)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.
FluxTop – Normal flux on top.
FluxBot – Normal flux on bottom.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, Name, BCSE, Flux, FluxTop, FluxBot, Surfaces)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
FluxTop (Double) – Normal flux on top.
FluxBot (Double) – Normal flux on bottom.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, Name, BCSE, Flux, FluxTop, FluxBot, Surface)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.
FluxTop (Double) – Normal flux on top.
FluxBot (Double) – Normal flux on bottom.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, Name, BCSE, Flux, FluxTop, FluxBot, Surfaces)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.
FluxTop – Normal flux on top.
FluxBot – Normal flux on bottom.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceFlux(entity, Name, BCSE, Flux, FluxTop, FluxBot, Surface)

Flux on surface: Add a thermal flux on a surface to the group

Alias: addSFLBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.
FluxTop – Normal flux on top.
FluxBot – Normal flux on bottom.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTemperature(entity, BCSE, Temperature)

Temperature on surface: Add a temperature on a surface to the group

Alias: addSTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.

addSurfaceTemperature(entity, Name, BCSE, Temperature)

Temperature on surface: Add a temperature on a surface to the group

Alias: addSTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.

addSurfaceTemperature(entity, BCSE, Temperature, Surfaces)

Temperature on surface: Add a temperature on a surface to the group

Alias: addSTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTemperature(entity, BCSE, Temperature, Surface)

Temperature on surface: Add a temperature on a surface to the group

Alias: addSTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTemperature(entity, BCSE, TempTop, TempBot)

Temperature on surface: Add a temperature on a surface to the group

Alias: addSTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TempTop (Double) – Temperature on top.
TempBot (Double) – Temperature on bottom.

addSurfaceTemperature(entity, Name, BCSE, Temperature, Surfaces)

Temperature on surface: Add a temperature on a surface to the group

Alias: addSTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTemperature(entity, Name, BCSE, Temperature, Surface)

Temperature on surface: Add a temperature on a surface to the group

Alias: addSTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTemperature(entity, Name, BCSE, TempTop, TempBot)

Temperature on surface: Add a temperature on a surface to the group

Alias: addSTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TempTop (Double) – Temperature on top.
TempBot (Double) – Temperature on bottom.

addSurfaceTemperature(entity, BCSE, TempTop, TempBot, Surfaces)

Temperature on surface: Add a temperature on a surface to the group

Alias: addSTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TempTop (Double) – Temperature on top.
TempBot (Double) – Temperature on bottom.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTemperature(entity, BCSE, TempTop, TempBot, Surface)

Temperature on surface: Add a temperature on a surface to the group

Alias: addSTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TempTop (Double) – Temperature on top.
TempBot (Double) – Temperature on bottom.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTemperature(entity, Name, BCSE, TempTop, TempBot, Surfaces)

Temperature on surface: Add a temperature on a surface to the group

Alias: addSTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TempTop (Double) – Temperature on top.
TempBot (Double) – Temperature on bottom.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTemperature(entity, Name, BCSE, TempTop, TempBot, Surface)

Temperature on surface: Add a temperature on a surface to the group

Alias: addSTBC

Constraints: Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TempTop (Double) – Temperature on top.
TempBot (Double) – Temperature on bottom.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTotalHead(entity, BCSE, TotalHead)

Total head on surface: Add a total head on a surface to the group

Alias: addSTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.

addSurfaceTotalHead(entity, Name, BCSE, TotalHead)

Total head on surface: Add a total head on a surface to the group

Alias: addSTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.

addSurfaceTotalHead(entity, BCSE, TotalHead, Surfaces)

Total head on surface: Add a total head on a surface to the group

Alias: addSTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTotalHead(entity, BCSE, TotalHead, Surface)

Total head on surface: Add a total head on a surface to the group

Alias: addSTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTotalHead(entity, BCSE, TotalHeadTop, TempBot)

Total head on surface: Add a total head on a surface to the group

Alias: addSTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHeadTop (Double) – Total head on top.
TempBot – Temperature on bottom.

addSurfaceTotalHead(entity, Name, BCSE, TotalHead, Surfaces)

Total head on surface: Add a total head on a surface to the group

Alias: addSTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTotalHead(entity, Name, BCSE, TotalHead, Surface)

Total head on surface: Add a total head on a surface to the group

Alias: addSTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTotalHead(entity, Name, BCSE, TotalHeadTop, TempBot)

Total head on surface: Add a total head on a surface to the group

Alias: addSTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHeadTop (Double) – Total head on top.
TempBot – Temperature on bottom.

addSurfaceTotalHead(entity, BCSE, TotalHeadTop, TempBot, Surfaces)

Total head on surface: Add a total head on a surface to the group

Alias: addSTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHeadTop (Double) – Total head on top.
TempBot – Temperature on bottom.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTotalHead(entity, BCSE, TotalHeadTop, TempBot, Surface)

Total head on surface: Add a total head on a surface to the group

Alias: addSTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHeadTop (Double) – Total head on top.
TempBot – Temperature on bottom.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTotalHead(entity, Name, BCSE, TotalHeadTop, TempBot, Surfaces)

Total head on surface: Add a total head on a surface to the group

Alias: addSTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHeadTop (Double) – Total head on top.
TempBot – Temperature on bottom.
Surfaces (List) – Surfaces: Surfaces where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addSurfaceTotalHead(entity, Name, BCSE, TotalHeadTop, TempBot, Surface)

Total head on surface: Add a total head on a surface to the group

Alias: addSTHBC

Constraints: Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHeadTop (Double) – Total head on top.
TempBot – Temperature on bottom.
Surface (POCCQuad) – Surface: Surface where the boundary conditions are applied. Conditions: “” does not exist in the dropdown list.

addTemperatureBCByNodes(entity, BCGroup, Temperature)

Nodal temperature: Apply temperature on nodes

Alias: addNTempBCByNodes

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCGroup (BCGroupStructural) – Boundary conditions group. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.

addTemperatureBCByNodes(entity, BCGroup, Name, Temperature)

Nodal temperature: Apply temperature on nodes

Alias: addNTempBCByNodes

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCGroup (BCGroupStructural) – Boundary conditions group. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Name (str) – Name. Conditions: “” input must be non-empty.
Temperature (Double) – Temperature.

addVolumeFlux(entity, BCSE, Flux)

Flux on volume: Add a thermal flux on a volume to the group

Alias: addVFBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.

addVolumeFlux(entity, BCSE, Flux)

Flux on volume: Add a thermal flux on a volume to the group

Alias: addVFBC

Constraints: 3 dimensions, Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.

addVolumeFlux(entity, Name, BCSE, Flux)

Flux on volume: Add a thermal flux on a volume to the group

Alias: addVFBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux (Double) – Thermal flux.

addVolumeFlux(entity, Name, BCSE, Flux)

Flux on volume: Add a thermal flux on a volume to the group

Alias: addVFBC

Constraints: 3 dimensions, Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Flux – Thermal flux.

addVolumeTemperature(entity, BCSE, Temperature)

Temperature on volume: Add a temperature on a volume to the group

Alias: addVTBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.

addVolumeTemperature(entity, Name, BCSE, Temperature)

Temperature on volume: Add a temperature on a volume to the group

Alias: addVTBC

Constraints: 3 dimensions, Thermal

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
Temperature (Double) – Temperature.

addVolumeTotalHead(entity, BCSE, TotalHead)

Total head on volume: Add a total head on a volume to the group

Alias: addVTHBC

Constraints: 3 dimensions, Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.

addVolumeTotalHead(entity, Name, BCSE, TotalHead)

Total head on volume: Add a total head on a volume to the group

Alias: addVTHBC

Constraints: 3 dimensions, Seepage

Parameters:

entity ([Entity]) – Entity/Entities to apply the command
Name (str) – Name. Conditions: “” input must be non-empty.
BCSE (SESolid3D) – Structural element: Structural element in which the boundary condition is applied. Conditions: The input must be non-empty. “” does not exist in the dropdown list.
TotalHead (Double) – Total head.

BCGroup(EntityName)

Obtains an entity given its name

Parameters:: EntityName (str) – Entity name.

BCGroupsModelGroup(GroupName)

Obtains a group given its name

Parameters:: GroupName (str) – Group name.