~/SBSHOW
~/SBSHOW, Label, ID, VALUE1, VALUE2, VALUE3, …, VALUE23
Changes the visualization properties of the tendon editor
PREP7: PRESTRESSED CONCRETE: Support beam
Label
Group of properties that will be modified
|
Description |
|
|
GLOBAL |
Global properties. |
|
CUT |
Properties of a cut of the support beam. |
|
TENDON |
Properties of a tendon. |
|
ALLTND |
Properties of the group of all tendons. |
ID
Number of the entity which will be modified.
VALUE1 to VALUE23
Values for each of the
properties. It depends on the value of Label.
If any of the values are left blank, it will not be modified.
Label = GLOBAL, ID not used.
|
VALUE |
Description |
||||
|
1 |
Cut numbers in the data table:
|
||||
|
2 |
Distance to each cut in the data table:
|
||||
|
3 |
Upper cover at each cut:
|
||||
|
4 |
Lower cover at each cut:
|
||||
|
5 |
Associated node to each cut for beam models:
|
||||
|
6 |
Relative font size percentage (by default 100) |
||||
|
7 |
Data table Height/Width percentage. |
||||
|
8 |
Data table graph Height/Width percentage. |
||||
|
9 |
Data table graph:
|
||||
|
10 to 23 |
Not used. |
Label = CUT, ID = Number of the cut (If 0 or blank, the properties will be changed in all tendons).
|
VALUE |
Description |
||||
|
1 |
Cut in the data table:
|
||||
|
2 |
Text angle, measured in degrees from the horizontal, anticlockwise. |
||||
|
3 to 23 |
Not used. |
Label = TENDON, ID = Number of the tendon (If 0 or blank, the properties will be changed in all tendons).
|
VALUE |
Description |
||||||||
|
1 |
Tendon in the data table:
|
||||||||
|
2 |
Slippage of strands losses discontinuities:
|
||||||||
|
3 |
Y coordinate:
|
||||||||
|
4 |
XY slope:
|
||||||||
|
5 |
Z coordinate:
|
||||||||
|
6 |
XZ slope:
|
||||||||
|
7 |
Points numbers in plan view:
|
||||||||
|
8 |
Points numbers in elevation view:
|
||||||||
|
9 |
Steel relaxation losses before transfer and due to heating (pre-tensioned only):
|
||||||||
|
10 |
Thermal expansion losses (pre-tensioned only):
|
||||||||
|
11 |
Friction losses (post-tensioned only):
|
||||||||
|
12 |
Slippage of strands in the anchorages losses:
|
||||||||
|
13 |
Elastic shortening of concrete member losses:
|
||||||||
|
14 |
Concrete shrinkage losses:
|
||||||||
|
15 |
Concrete creep losses:
|
||||||||
|
16 |
Steel relaxation losses:
|
||||||||
|
17 |
Immediate losses (added):
|
||||||||
|
18 |
Long-term losses (added):
|
||||||||
|
19 |
All losses (added):
|
||||||||
|
20 |
Initial tendon force:
|
||||||||
|
21 |
Anchorage tendon force:
|
||||||||
|
22 |
Initial tendon stress:
|
||||||||
|
23 |
Anchorage tendon stress:
|
Label = ALLTND, ID = Not used.
|
VALUE |
Description |
||||||||
|
1 |
All tendons group:
|
||||||||
|
2 to 8 |
Not used. |
||||||||
|
9 |
Steel relaxation losses before transfer and due to heating (pre-tensioned only):
|
||||||||
|
10 |
Thermal expansion losses (pre-tensioned only):
|
||||||||
|
11 |
Friction losses (post-tensioned only):
|
||||||||
|
12 |
Slippage of strands in the anchorages losses:
|
||||||||
|
13 |
Elastic shortening of concrete member losses:
|
||||||||
|
14 |
Concrete shrinkage losses:
|
||||||||
|
15 |
Concrete creep losses:
|
||||||||
|
16 |
Steel relaxation losses:
|
||||||||
|
17 |
Immediate losses (added):
|
||||||||
|
18 |
Long-term losses (added):
|
||||||||
|
19 |
All losses (added):
|
||||||||
|
20 |
Initial tendon force:
|
||||||||
|
21 |
Anchorage tendon force:
|
||||||||
|
22 to 23 |
Not used. |
Notes
- The support beam must be defined.
Menu Paths
Main Menu > Civil Preprocessor > Prestress Concrete Prep > Tendons > Tendon Editor
¾¾¾¾¾¾¨¾¾¾¾¾¾