CFVR0906 - Shell design with reinforcement at 30º

Shell design with reinforcement at 30º according to Eurocode 2 using the Wood-Armer method.

The model is made up of two square shell elements of 1.0m x 1.0m. The nodes of one side are completely restrained and one of the nodes between both element has its vertical movement restrained (perpendicular to the shells).
The applied loads are fixed displacements at the free side of the model.
The shell is defined without an initial amount of reinforcement, since CivilFEM will calculate it, but the 30º angle between reinforcement bars is specified.

The reinforcement design method is the Wood-Armer method. The values obtained by CivilFEM are compared to the analytical values obtained in the log file.

Element types used in the model: SHELL63

Needed CivilFEM Modules:
Geotechnical Module
Bridges and Civil Non Linearities Module
Advanced Prestressed Concrete Module

The example can be launched on an educational license.

KEYWORDS

Shell

Shell Vertex

Reinforced Concrete

Eurocode 2

Model Statistics
Number of elements	2
Number of nodes	6
Number of civil materials	2
Number of cross sections	0
Number of shell vertices	1

Log file: CFVR0906.DAT

   FINISH
  ~CFCLEAR,,1
   NomFile='CFVR0906'
  /TITLE, %NomFile%, Shell design with reinforcement at 30º
! ---------------------------------------------------------------------------------
! Model definition and analysis
! ---------------------------------------------------------------------------------

! Setup
 ~UNITS,SI
 ~CODESEL,EC3-92,EC2-91,EC2-91,,EC8-94
 ~CFCONFG,PLRES   ,SHELL   ,EPSW 
 ~CFCONFG,RESULT,CFSHF,1

*AFUN,DEG
/PREP7
! Materials
 ~CFMP,5,LIB,CONCRETE,EHE,HA-35
 ~CFMP,2,LIB,REINF,EHE,B 500 S
! Element types
  ET,2,SHELL63
! Shell vertex
  t=0.12     ! Thickness
  r=0.03     ! Cover
  th = 30    ! Reinforcement angle
 ~SHLRNF,1,t,5,2,r,0.0,0.0,0.0,0.0,0,th,45
! Beam & Shell property
 ~BMSHPRO,10,SHELL,1,1,1,1,63,,,,Shell property

! Nodes
  N,10,0.0,0.0
  N,20,1.0,0.0
  N,30,2.0,0.0
  N,40,0.0,1.0
  N,50,1.0,1.0
  N,60,2.0,1.0
! Elements
  MAT,5 $ REAL,10 $ TYPE,2
  EN,100, 10, 20, 50, 40
  EN,200, 20, 30, 60, 50
! Boundary conditions
  D,10,ALL,0.0
  D,40,ALL,0.0
  D,50,UZ,0.0
! Solve
  /SOLU
  D,30,UZ,-0.025
  D,60,UX, 0.001
  D,60,UY, 0.001
  SOLVE

/POST1
! ---------------------------------------------------------------------------------
! Forces and moments calculation on nodes of element 100
! ---------------------------------------------------------------------------------
  *DIM,S  ,,6,3,4 ! Stresses(direction,layer,node)
  *DIM,ESF,,8,4   ! Forces & Moments(component,node)   (Tx,Ty,Txy,Mx,My,Mxy,Nx,Ny)
  ESEL,S,ELEM,,100
! Stresses
  SHELL,TOP
  *VGET,S(1,1,1),NODE,10,S,X,,,4
  *VGET,S(1,1,2),NODE,20,S,X,,,4
  *VGET,S(1,1,3),NODE,50,S,X,,,4
  *VGET,S(1,1,4),NODE,40,S,X,,,4
  SHELL,MID
  *VGET,S(1,2,1),NODE,10,S,X,,,4
  *VGET,S(1,2,2),NODE,20,S,X,,,4
  *VGET,S(1,2,3),NODE,50,S,X,,,4
  *VGET,S(1,2,4),NODE,40,S,X,,,4
  SHELL,BOT
  *VGET,S(1,3,1),NODE,10,S,X,,,4
  *VGET,S(1,3,2),NODE,20,S,X,,,4
  *VGET,S(1,3,3),NODE,50,S,X,,,4
  *VGET,S(1,3,4),NODE,40,S,X,,,4
! Forces & Moments
  *DO,I,1,4
    ESF(1,I)=t*(S(1,1,I)+4*S(1,2,I)+S(1,3,I))/6
    ESF(2,I)=t*(S(2,1,I)+4*S(2,2,I)+S(2,3,I))/6
    ESF(3,I)=t*(S(4,1,I)+4*S(4,2,I)+S(4,3,I))/6
    ESF(4,I)=-t**2*(S(1,1,I)-S(1,3,I))/12
    ESF(5,I)=-t**2*(S(2,1,I)-S(2,3,I))/12
    ESF(6,I)=-t**2*(S(4,1,I)-S(4,3,I))/12
    ESF(7,I)=t*(S(6,1,I)+4*S(6,2,I)+S(6,3,I))/6
    ESF(8,I)=t*(S(5,1,I)+4*S(5,2,I)+S(5,3,I))/6
  *ENDDO
! Design moments
  *DIM,Mxi,,4
  *DIM,Myi,,4
  *DIM,Mxs,,4
  *DIM,Mys,,4
  ! Lower reinforcement bending moments
    *DO,I,1,4
      Mxi(I)=ESF(4,I)-2*ESF(6,I)*TAN(th)+ESF(5,I)*(TAN(th))**2
      Mxi(I)=Mxi(I)+ABS((ESF(6,I)-ESF(5,I)*TAN(th))/COS(th))
      Myi(I)=ESF(5,I)/(COS(th))**2+ABS((ESF(6,I)-ESF(5,I)*TAN(th))/COS(th))
      *IF,Mxi(I),LT,0,THEN
         Mxi(I)=0
         Myi(I)=(ESF(6,I)-ESF(5,I)*TAN(th))**2
         Myi(I)=ABS(Myi(I)/(ESF(4,I)-2*ESF(6,I)*TAN(th)+ESF(5,I)*(TAN(th))**2))
         Myi(I)=(ESF(5,I)+Myi(I))/(COS(th))**2
         Myi(I)=(Myi(I)>0)
      *ENDIF
      *IF,Myi(I),LT,0,THEN
         Mxi(I)=ESF(5,I)*(TAN(th))**2+ABS((ESF(6,I)-ESF(5,I)*TAN(th))**2/ESF(5,I))
         Mxi(I)=Mxi(I)+2*ESF(6,I)*TAN(th)+Mxi(I)
         Mxi(I)=(Mxi(I)>0)
         Myi(I)=0
      *ENDIF
    *ENDDO
  ! Upper reinforcement bending moments
    *DO,I,1,4
      Mxs(I)=ESF(4,I)-2*ESF(6,I)*TAN(th)+ESF(5,I)*(TAN(th))**2
      Mxs(I)=Mxs(I)-ABS((ESF(6,I)-ESF(5,I)*TAN(th))/COS(th))
      Mys(I)=ESF(5,I)/(COS(th))**2-ABS((ESF(6,I)-ESF(5,I)*TAN(th))/COS(th))
      *IF,Mxs(I),GT,0,THEN
         Mxs(I)=0
         Mys(I)=(ESF(6,I)-ESF(5,I)*TAN(th))**2
         Mys(I)=ABS(Mys(I)/(ESF(4,I)-2*ESF(6,I)*TAN(th)+ESF(5,I)*(TAN(th))**2))
         Mys(I)=(ESF(5,I)-Mys(I))/(COS(th))**2
         Mys(I)=(Mys(I)<0)
      *ENDIF
      *IF,Mys(I),GT,0,THEN
         Mxs(I)=ESF(5,I)*(TAN(th))**2-ABS((ESF(6,I)-ESF(5,I)*TAN(th))**2/ESF(5,I))
         Mxs(I)=Mxs(I)+2*ESF(6,I)*TAN(th)+Mxs(I)
         Mxs(I)=(Mxs(I)<0)
         Mys(I)=0
      *ENDIF
    *ENDDO
! Designed reinforcement
  *DIM,Axi,,4
  *DIM,Ayi,,4
  *DIM,Axs,,4
  *DIM,Ays,,4
 ~CFGET,FCD,MATERIAL,5,EC2_C,FCD
 ~CFGET,FYD,MATERIAL,2,EC2_S,FYD
 ~CFGET,GAMMAC,MATERIAL,5,EC2_C,GAMC
 ~CFGET,GAMMAS,MATERIAL,2,EC2_S,GAMS
 ~CFGET,EX,MATERIAL,2,DATGEN,EX

I=1
  ~SBPAR,Mxi(I),1.0,t,'ASBxi','ASTxi',r,r,FCD,FYD,EX
  ~SBPAR,Myi(I),1.0,t,'ASByi','ASTyi',r,r,FCD,FYD,EX
  ~SBPAR,Mxs(I),1.0,t,'ASBxs','ASTxs',r,r,FCD,FYD,EX
  ~SBPAR,Mys(I),1.0,t,'ASBys','ASTys',r,r,FCD,FYD,EX
   Axi(I)= (ASBxi > ASBxs)
   Ayi(I)= (ASByi > ASBys)
   Axs(I)= (ASTxs > ASTxi)
   Ays(I)= (ASTys > ASTyi)

I=2
  ~SBPAR,Mxi(I),1.0,t,'ASBxi','ASTxi',r,r,FCD,FYD,EX
  ~SBPAR,Myi(I),1.0,t,'ASByi','ASTyi',r,r,FCD,FYD,EX
  ~SBPAR,Mxs(I),1.0,t,'ASBxs','ASTxs',r,r,FCD,FYD,EX
  ~SBPAR,Mys(I),1.0,t,'ASBys','ASTys',r,r,FCD,FYD,EX
   Axi(I)= (ASBxi > ASBxs)
   Ayi(I)= (ASByi > ASBys)
   Axs(I)= (ASTxs > ASTxi)
   Ays(I)= (ASTys > ASTyi)

I=3
  ~SBPAR,Mxi(I),1.0,t,'ASBxi','ASTxi',r,r,FCD,FYD,EX
  ~SBPAR,Myi(I),1.0,t,'ASByi','ASTyi',r,r,FCD,FYD,EX
  ~SBPAR,Mxs(I),1.0,t,'ASBxs','ASTxs',r,r,FCD,FYD,EX
  ~SBPAR,Mys(I),1.0,t,'ASBys','ASTys',r,r,FCD,FYD,EX
   Axi(I)= (ASBxi > ASBxs)
   Ayi(I)= (ASByi > ASBys)
   Axs(I)= (ASTxs > ASTxi)
   Ays(I)= (ASTys > ASTyi)

I=4
  ~SBPAR,Mxi(I),1.0,t,'ASBxi','ASTxi',r,r,FCD,FYD,EX
  ~SBPAR,Myi(I),1.0,t,'ASByi','ASTyi',r,r,FCD,FYD,EX
  ~SBPAR,Mxs(I),1.0,t,'ASBxs','ASTxs',r,r,FCD,FYD,EX
  ~SBPAR,Mys(I),1.0,t,'ASBys','ASTys',r,r,FCD,FYD,EX
   Axi(I)= (ASBxi > ASBxs)
   Ayi(I)= (ASByi > ASBys)
   Axs(I)= (ASTxs > ASTxi)
   Ays(I)= (ASTys > ASTyi)

  ESEL,ALL
! ---------------------------------------------------------------------------------
! Design with CivilFEM
! ---------------------------------------------------------------------------------
 ~CFSET,,1,1
 ~DIMCON,SHELL,WOOD

  ESEL,S,ELEM,,100
! Forces & Moments with CivilFEM
  *DIM,ESF_CF,,8,4   ! Forces & Moments(component,node)   (Tx,Ty,Txy,Mx,My,Mxy,Nx,Ny)
!SHELL,TOP

~PLSHFOR,TX
  *GET,ESF_CF(1,1),NODE,10,EPSW
  *GET,ESF_CF(1,2),NODE,20,EPSW
  *GET,ESF_CF(1,3),NODE,50,EPSW
  *GET,ESF_CF(1,4),NODE,40,EPSW
~PLSHFOR,TY
  *GET,ESF_CF(2,1),NODE,10,EPSW
  *GET,ESF_CF(2,2),NODE,20,EPSW
  *GET,ESF_CF(2,3),NODE,50,EPSW
  *GET,ESF_CF(2,4),NODE,40,EPSW
~PLSHFOR,TXY
  *GET,ESF_CF(3,1),NODE,10,EPSW
  *GET,ESF_CF(3,2),NODE,20,EPSW
  *GET,ESF_CF(3,3),NODE,50,EPSW
  *GET,ESF_CF(3,4),NODE,40,EPSW

!SHELL,BOTTOM
~PLSHFOR,MX
  *GET,ESF_CF(4,1),NODE,10,EPSW
  *GET,ESF_CF(4,2),NODE,20,EPSW
  *GET,ESF_CF(4,3),NODE,50,EPSW
  *GET,ESF_CF(4,4),NODE,40,EPSW
~PLSHFOR,MY
  *GET,ESF_CF(5,1),NODE,10,EPSW
  *GET,ESF_CF(5,2),NODE,20,EPSW
  *GET,ESF_CF(5,3),NODE,50,EPSW
  *GET,ESF_CF(5,4),NODE,40,EPSW
~PLSHFOR,MXY
  *GET,ESF_CF(6,1),NODE,10,EPSW
  *GET,ESF_CF(6,2),NODE,20,EPSW
  *GET,ESF_CF(6,3),NODE,50,EPSW
  *GET,ESF_CF(6,4),NODE,40,EPSW

 !SHELL,TOP
~PLSHFOR,NX
  *GET,ESF_CF(7,1),NODE,10,EPSW
  *GET,ESF_CF(7,2),NODE,20,EPSW
  *GET,ESF_CF(7,3),NODE,50,EPSW
  *GET,ESF_CF(7,4),NODE,40,EPSW
~PLSHFOR,NY
  *GET,ESF_CF(8,1),NODE,10,EPSW
  *GET,ESF_CF(8,2),NODE,20,EPSW
  *GET,ESF_CF(8,3),NODE,50,EPSW
  *GET,ESF_CF(8,4),NODE,40,EPSW

! Design moments with CivilFEM
  *DIM,Mxi_CF,,4
  *DIM,Myi_CF,,4
  *DIM,Mxs_CF,,4
  *DIM,Mys_CF,,4
 !SHELL,BOTTOM
~PLSHCON,MXB
  *GET,Mxi_CF(1),NODE,10,EPSW
  *GET,Mxi_CF(2),NODE,20,EPSW
  *GET,Mxi_CF(3),NODE,50,EPSW
  *GET,Mxi_CF(4),NODE,40,EPSW
~PLSHCON,MYB
  *GET,Myi_CF(1),NODE,10,EPSW
  *GET,Myi_CF(2),NODE,20,EPSW
  *GET,Myi_CF(3),NODE,50,EPSW
  *GET,Myi_CF(4),NODE,40,EPSW

!SHELL,TOP
~PLSHCON,MXT
  *GET,Mxs_CF(1),NODE,10,EPSW
  *GET,Mxs_CF(2),NODE,20,EPSW
  *GET,Mxs_CF(3),NODE,50,EPSW
  *GET,Mxs_CF(4),NODE,40,EPSW
~PLSHCON,MYT
  *GET,Mys_CF(1),NODE,10,EPSW
  *GET,Mys_CF(2),NODE,20,EPSW
  *GET,Mys_CF(3),NODE,50,EPSW
  *GET,Mys_CF(4),NODE,40,EPSW

! Designed reinforcement obtained with CivilFEM
  *DIM,Axi_CF,,4
  *DIM,Ayi_CF,,4
  *DIM,Axs_CF,,4
  *DIM,Ays_CF,,4
 !SHELL,BOTTOM
~PLSHCON,ASBX
  *GET,Axi_CF(1),NODE,10,EPSW
  *GET,Axi_CF(2),NODE,20,EPSW
  *GET,Axi_CF(3),NODE,50,EPSW
  *GET,Axi_CF(4),NODE,40,EPSW
~PLSHCON,ASBY
  *GET,Ayi_CF(1),NODE,10,EPSW
  *GET,Ayi_CF(2),NODE,20,EPSW
  *GET,Ayi_CF(3),NODE,50,EPSW
  *GET,Ayi_CF(4),NODE,40,EPSW

!SHELL,TOP
~PLSHCON,ASTX
  *GET,Axs_CF(1),NODE,10,EPSW
  *GET,Axs_CF(2),NODE,20,EPSW
  *GET,Axs_CF(3),NODE,50,EPSW
  *GET,Axs_CF(4),NODE,40,EPSW
~PLSHCON,ASTY
  *GET,Ays_CF(1),NODE,10,EPSW
  *GET,Ays_CF(2),NODE,20,EPSW
  *GET,Ays_CF(3),NODE,50,EPSW
  *GET,Ays_CF(4),NODE,40,EPSW

!--------------------------------------------------------------------------------------
! DATA CHECK
!--------------------------------------------------------------------------------------
! Data comparison number
  NComp = 64
  NComp_ch = 0

! Matrix dim.
  *DIM,LABEL,CHAR,Ncomp,1
  *DIM,LABEL_CH,CHAR,Ncomp_ch,1
  *DIM,VALUE,,Ncomp,3
  *DIM,VALUE_CH,CHAR,Ncomp_ch,3
  *DIM,TOLER,,Ncomp,2

! Labels
! ---------------------------------------------------------------------------------
  LABEL( 1) ='TX_I'
  LABEL( 2) ='TX_J'
  LABEL( 3) ='TX_K'
  LABEL( 4) ='TX_L'
  LABEL( 5) ='TY_I'
  LABEL( 6) ='TY_J'
  LABEL( 7) ='TY_K'
  LABEL( 8) ='TY_L'
  LABEL( 9) ='TXY_I'
  LABEL(10) ='TXY_J'
  LABEL(11) ='TXY_K'
  LABEL(12) ='TXY_L'
  LABEL(13) ='MX_I'
  LABEL(14) ='MX_J'
  LABEL(15) ='MX_K'
  LABEL(16) ='MX_L'
  LABEL(17) ='MY_I'
  LABEL(18) ='MY_J'
  LABEL(19) ='MY_K'
  LABEL(20) ='MY_L'
  LABEL(21) ='MXY_I'
  LABEL(22) ='MXY_J'
  LABEL(23) ='MXY_K'
  LABEL(24) ='MXY_L'
  LABEL(25) ='NX_I'
  LABEL(26) ='NX_J'
  LABEL(27) ='NX_K'
  LABEL(28) ='NX_L'
  LABEL(29) ='NY_I'
  LABEL(30) ='NY_J'
  LABEL(31) ='NY_K'
  LABEL(32) ='NY_L'
  LABEL(33) ='MDxi_I'
  LABEL(34) ='MDxi_J'
  LABEL(35) ='MDxi_K'
  LABEL(36) ='MDxi_L'
  LABEL(37) ='MDyi_I'
  LABEL(38) ='MDyi_J'
  LABEL(39) ='MDyi_K'
  LABEL(40) ='MDyi_L'
  LABEL(41) ='MDxs_I'
  LABEL(42) ='MDxs_J'
  LABEL(43) ='MDxs_K'
  LABEL(44) ='MDxs_L'
  LABEL(45) ='MDys_I'
  LABEL(46) ='MDys_J'
  LABEL(47) ='MDys_K'
  LABEL(48) ='MDys_L'
  LABEL(49) ='ASxi_I'
  LABEL(50) ='ASxi_J'
  LABEL(51) ='ASxi_K'
  LABEL(52) ='ASxi_L'
  LABEL(53) ='ASyi_I'
  LABEL(54) ='ASyi_J'
  LABEL(55) ='ASyi_K'
  LABEL(56) ='ASyi_L'
  LABEL(57) ='ASxs_I'
  LABEL(58) ='ASxs_J'
  LABEL(59) ='ASxs_K'
  LABEL(60) ='ASxs_L'
  LABEL(61) ='ASys_I'
  LABEL(62) ='ASys_J'
  LABEL(63) ='ASys_K'
  LABEL(64) ='ASys_L'

! Correct values
! ---------------------------------------------------------------------------------
  ! Forces & Moments
    *DO,I,1,8
      *DO,J,1,4
        VALUE(4*(I-1)+J,1)= ESF(I,J)
      *ENDDO
    *ENDDO
  ! Design moments
    *DO,I,1,4
      VALUE(32+I,1)=Mxi(I) ! Mxi(I)
    *ENDDO
    *DO,I,1,4
      VALUE(36+I,1)=Myi(I) ! Myi(I)
    *ENDDO
    *DO,I,1,4
      VALUE(40+I,1)=Mxs(I) ! Mxs(I)
    *ENDDO
    *DO,I,1,4
      VALUE(44+I,1)=Mys(I) ! Mys(I)
    *ENDDO
  ! Reinforcement
    *DO,I,1,4
      VALUE(48+I,1)=Axi(I)
    *ENDDO
    *DO,I,1,4
      VALUE(52+I,1)=Ayi(I)
    *ENDDO
    *DO,I,1,4
      VALUE(56+I,1)=Axs(I)
    *ENDDO
    *DO,I,1,4
      VALUE(60+I,1)=Ays(I)
    *ENDDO

! Obtained values
! ---------------------------------------------------------------------------------
  ! Forces & Moments
    *DO,I,1,8
      *DO,J,1,4
        VALUE(4*(I-1)+J,2)= ESF_CF(I,J)
      *ENDDO
    *ENDDO
  ! Design moments
    *DO,I,1,4
      VALUE(32+I,2)=Mxi_CF(I)
    *ENDDO
    *DO,I,1,4
      VALUE(36+I,2)=Myi_CF(I)
    *ENDDO
    *DO,I,1,4
      VALUE(40+I,2)=Mxs_CF(I)
    *ENDDO
    *DO,I,1,4
      VALUE(44+I,2)=Mys_CF(I)
    *ENDDO
  ! Reinforcement
    *DO,I,1,4
      VALUE(48+I,2)=Axi_CF(I)
    *ENDDO
    *DO,I,1,4
      VALUE(52+I,2)=Ayi_CF(I)
    *ENDDO
    *DO,I,1,4
      VALUE(56+I,2)=Axs_CF(I)
    *ENDDO
    *DO,I,1,4
      VALUE(60+I,2)=Ays_CF(I)
    *ENDDO

! Warning and error tolerances
  TOLER( 1, 1)= 1E-01   $   TOLER( 1, 2)= 1E-00
  TOLER( 2, 1)= 1E-01   $   TOLER( 2, 2)= 1E-00
  TOLER( 3, 1)= 1E-02   $   TOLER( 3, 2)= 1E-01
  TOLER( 4, 1)= 1E-02   $   TOLER( 4, 2)= 1E-01
  TOLER( 5, 1)= 1E-02   $   TOLER( 5, 2)= 1E-01
  TOLER( 6, 1)= 1E-02   $   TOLER( 6, 2)= 1E-01
  TOLER( 7, 1)= 1E-02   $   TOLER( 7, 2)= 1E-01
  TOLER( 8, 1)= 1E-02   $   TOLER( 8, 2)= 1E-01
  TOLER( 9, 1)= 1E-02   $   TOLER( 9, 2)= 1E-01
  TOLER(10, 1)= 1E-02   $   TOLER(10, 2)= 1E-01
  TOLER(11, 1)= 1E-02   $   TOLER(11, 2)= 1E-01
  TOLER(12, 1)= 1E-02   $   TOLER(12, 2)= 1E-01
  TOLER(13, 1)= 1E-02   $   TOLER(13, 2)= 1E-01
  TOLER(14, 1)= 1E-03   $   TOLER(14, 2)= 1E-02
  TOLER(15, 1)= 1E-02   $   TOLER(15, 2)= 1E-01
  TOLER(16, 1)= 1E-03   $   TOLER(16, 2)= 1E-02
  TOLER(17, 1)= 1E-02   $   TOLER(17, 2)= 1E-01
  TOLER(18, 1)= 1E-04   $   TOLER(18, 2)= 1E-03
  TOLER(19, 1)= 1E-04   $   TOLER(19, 2)= 1E-03
  TOLER(20, 1)= 1E-03   $   TOLER(20, 2)= 1E-02
  TOLER(21, 1)= 1E-03   $   TOLER(21, 2)= 1E-02
  TOLER(22, 1)= 1E-03   $   TOLER(22, 2)= 1E-02
  TOLER(23, 1)= 1E-03   $   TOLER(23, 2)= 1E-02
  TOLER(24, 1)= 1E-03   $   TOLER(24, 2)= 1E-02
  TOLER(25, 1)= 1E-15   $   TOLER(25, 2)= 1E-14
  TOLER(26, 1)= 1E-15   $   TOLER(26, 2)= 1E-14
  TOLER(27, 1)= 1E-15   $   TOLER(27, 2)= 1E-14
  TOLER(28, 1)= 1E-15   $   TOLER(28, 2)= 1E-14
  TOLER(29, 1)= 1E-15   $   TOLER(29, 2)= 1E-14
  TOLER(30, 1)= 1E-15   $   TOLER(30, 2)= 1E-14
  TOLER(31, 1)= 1E-15   $   TOLER(31, 2)= 1E-14
  TOLER(32, 1)= 1E-15   $   TOLER(32, 2)= 1E-14
  TOLER(33, 1)= 1E-15   $   TOLER(33, 2)= 1E-14
  TOLER(34, 1)= 1E-03   $   TOLER(34, 2)= 1E-02
  TOLER(35, 1)= 1E-15   $   TOLER(35, 2)= 1E-14
  TOLER(36, 1)= 1E-02   $   TOLER(36, 2)= 1E-01
  TOLER(37, 1)= 1E-02   $   TOLER(37, 2)= 1E-01
  TOLER(38, 1)= 1E-02   $   TOLER(38, 2)= 1E-01
  TOLER(39, 1)= 1E-02   $   TOLER(39, 2)= 1E-01
  TOLER(40, 1)= 1E-02   $   TOLER(40, 2)= 1E-01
  TOLER(41, 1)= 1E-02   $   TOLER(41, 2)= 1E-01
  TOLER(42, 1)= 1E-02   $   TOLER(42, 2)= 1E-01
  TOLER(43, 1)= 1E-02   $   TOLER(43, 2)= 1E-01
  TOLER(44, 1)= 1E-02   $   TOLER(44, 2)= 1E-01
  TOLER(45, 1)= 1E-02   $   TOLER(45, 2)= 1E-01
  TOLER(46, 1)= 1E-02   $   TOLER(46, 2)= 1E-01
  TOLER(47, 1)= 1E-02   $   TOLER(47, 2)= 1E-01
  TOLER(48, 1)= 1E-02   $   TOLER(48, 2)= 1E-01
  TOLER(49, 1)= 1E-06   $   TOLER(49, 2)= 1E-05
  TOLER(50, 1)= 1E-06   $   TOLER(50, 2)= 1E-05
  TOLER(51, 1)= 1E-06   $   TOLER(51, 2)= 1E-05
  TOLER(52, 1)= 1E-06   $   TOLER(52, 2)= 1E-05
  TOLER(53, 1)= 1E-06   $   TOLER(53, 2)= 1E-05
  TOLER(54, 1)= 1E-06   $   TOLER(54, 2)= 1E-05
  TOLER(55, 1)= 1E-06   $   TOLER(55, 2)= 1E-05
  TOLER(56, 1)= 1E-06   $   TOLER(56, 2)= 1E-05
  TOLER(57, 1)= 1E-06   $   TOLER(57, 2)= 1E-05
  TOLER(58, 1)= 1E-06   $   TOLER(58, 2)= 1E-05
  TOLER(59, 1)= 1E-06   $   TOLER(59, 2)= 1E-05
  TOLER(60, 1)= 1E-06   $   TOLER(60, 2)= 1E-05
  TOLER(61, 1)= 1E-06   $   TOLER(61, 2)= 1E-05
  TOLER(62, 1)= 1E-06   $   TOLER(62, 2)= 1E-05
  TOLER(63, 1)= 1E-06   $   TOLER(63, 2)= 1E-05
  TOLER(64, 1)= 1E-06   $   TOLER(64, 2)= 1E-05

!--------------------------------------------------------------------------------------
! Results comparison
!--------------------------------------------------------------------------------------
  COMPARA.MAC

Results

Label	Target	CivilFEM	Ratio	Tolerance
TX_I	2.4513e+006	2.4513e+006	1.000	1
TX_J	2.4513e+006	2.4513e+006	1.000	1
TX_K	2.9649e+005	2.9649e+005	1.000	0.1
TX_L	2.9649e+005	2.9649e+005	1.000	0.1
TY_I	2.7478e+005	2.7478e+005	1.000	0.1
TY_J	-3.2609e+005	-3.2609e+005	1.000	0.1
TY_K	-3.2609e+005	-3.2609e+005	1.000	0.1
TY_L	2.7478e+005	2.7478e+005	1.000	0.1
TXY_I	5.7769e+005	5.7769e+005	1.000	0.1
TXY_J	5.7769e+005	5.7769e+005	1.000	0.1
TXY_K	5.7769e+005	5.7769e+005	1.000	0.1
TXY_L	5.7769e+005	5.7769e+005	1.000	0.1
MX_I	-1.2173e+005	-1.2173e+005	1.000	0.1
MX_J	-11662	-11662	1.000	0.01
MX_K	-1.1641e+005	-1.1641e+005	1.000	0.1
MX_L	62079	62079	1.000	0.01
MY_I	-36410	-36410	1.000	0.1
MY_J	-8875	-8875	1.000	0.001
MY_K	-2735.7	-2735.7	1.000	0.001
MY_L	24480	24480	1.000	0.01
MXY_I	13619	13619	1.000	0.01
MXY_J	37420	37420	1.000	0.01
MXY_K	48011	48011	1.000	0.01
MXY_L	24210	24210	1.000	0.01
NX_I	0	0	0.000	1e-014
NX_J	0	0	0.000	1e-014
NX_K	0	0	0.000	1e-014
NX_L	0	0	0.000	1e-014
NY_I	0	0	0.000	1e-014
NY_J	0	0	0.000	1e-014
NY_K	0	0	0.000	1e-014
NY_L	0	0	0.000	1e-014
MDxi_I	0	0	0.000	1e-014
MDxi_J	0	0	0.000	0.01
MDxi_K	0	0	0.000	1e-014
MDxi_L	53919	53919	1.000	0.1
MDyi_I	0	0	0.000	0.1
MDyi_J	29899	29899	1.000	0.1
MDyi_K	15332	15332	1.000	0.1
MDyi_L	44275	44275	1.000	0.1
MDxs_I	-1.896e+005	-1.896e+005	1.000	0.1
MDxs_J	-1.0695e+005	-1.0695e+005	1.000	0.1
MDxs_K	-2.3002e+005	-2.3002e+005	1.000	0.1
MDxs_L	0	0	0.000	0.1
MDys_I	-88547	-88547	1.000	0.1
MDys_J	-60959	-60959	1.000	0.1
MDys_K	-60909	-60909	1.000	0.1
MDys_L	0	0	0.000	0.1
ASxi_I	0.0067279	0.0067279	1.000	1e-005
ASxi_J	0.002447	0.002447	1.000	1e-005
ASxi_K	0.0088221	0.0088221	1.000	1e-005
ASxi_L	0.0017516	0.0017516	1.000	1e-005
ASyi_I	0.0014934	0.0014934	1.000	1e-005
ASyi_J	0.00085261	0.00085261	1.000	1e-005
ASyi_K	0.00041254	0.00041254	1.000	1e-005
ASyi_L	0.0013551	0.0013551	1.000	1e-005
ASxs_I	0.0070047	0.0070047	1.000	1e-005
ASxs_J	0.0038368	0.0038368	1.000	1e-005
ASxs_K	0.0085543	0.0085543	1.000	1e-005
ASxs_L	0	0	0.000	1e-005
ASys_I	0.0031312	0.0031312	1.000	1e-005
ASys_J	0.0020736	0.0020736	1.000	1e-005
ASys_K	0.0020717	0.0020717	1.000	1e-005
ASys_L	0	0	0.000	1e-005

Contains proprietary and confidential information of Ingeciber, S.A.

CivilFEM Online Help

CFVR0906 - Shell design with reinforcement at 30º

Shell design with reinforcement at 30º according to Eurocode 2 using the Wood-Armer method.

Results