Element types used in the model: BEAM4

Needed CivilFEM Modules:
Geotechnical Module
Bridges and Civil Non Linearities Module
Advanced Prestressed Concrete Module

   FINISH
  ~CFCLEAR,,1
   NomFile='CFVR2909'
   /TITLE,%NomFile%, TORSION CHECKING ACCORDING TO SP-52-101-03

! -------------------------------------------------------------------------------------
! Initial data
! -------------------------------------------------------------------------------------
! CivilFEM SETUP
  ~UNITS,,LENG,M
  ~UNITS,,TIME,S
  ~UNITS,,FORC,MP
  ~CODESEL,EC3-92,SP52101,EC2,,EC8-94

! Preprocessor
  /PREP7

! Parameters
  L=1              ! Length in m
  b=.4             ! Cross-section width in m.
  h=.3             ! Depth in m.
  T=0.95*1.6       ! Torsional moment in Mp*m
  Q=4.7*1.6        ! Maximum concomitant design shear force in Mp

! Material Definition
 ~CFMP,1,LIB,CONCRETE,SP52101,B25
 ~CFMP,2,LIB,REINF,SP52101,A500

! Element Type Definition
  ET,1,Beam4                                 ! Element Type 1: 3D Beam

! Cross-section definition
 ~CSECDMS,1,REC,1,0.3,0.4
! Reinforcement definition
 ~RNFDEF,1,TORSION,2,3.03e-4, , , ,3.27e-4,  ! Torsional reinforcement
! Beam properties
  ~BMSHPRO,1,BEAM,1,1,,,4,1,0,,Beam Property

! Model Construction
  N,1                                    ! Nodes input
  N,5,L
  FILL,1,5
  E,1,2                                  ! Elements input
  EGEN,4,1,1,1
  D,1,ALL                                ! Boundary conditions

/SOLU
  F,5,FY,-Q
  F,5,MX,T
  SOLVE               ! Calculation

/POST1
! Postprocessor
  ~CFSET,,1,1       ! Read first load step

! Torsion checking according to SP-52-101-03
  ~CHKCON,SHT,TORSION

!--------------------------------------------------------------------------------------
! DATA CHECK
!--------------------------------------------------------------------------------------
! Data comparison number
  NComp = 3
  NComp_ch = 0

 ! Matrix dim.
 *DIM,LABEL,CHAR,Ncomp,1
 *DIM,LABEL_CH,CHAR,Ncomp_ch,1
 *DIM,VALUE,,Ncomp,3
 *DIM,VALUE_CH,CHAR,Ncomp_ch,3
 *DIM,TOLER,,Ncomp,2

! Labels
  LABEL(1,1) = 'TS1'
  LABEL(2,1) = 'TSW1'
  LABEL(3,1) = 'CRT_TOT'

! Correct values
  VALUE(1,1)=0.62133082E0
  VALUE(2,1)=0.15167815E0
  VALUE(3,1)=0.19663436E1

! Comparison
 ~PLLSCON,TS1
 *GET,VALUE(1,2),ELEM,3,ETAB,CFETAB_J
 ~PLLSCON,TSW1
  *GET,VALUE(2,2),ELEM,3,ETAB,CFETAB_J
 ~PLLSCON,CRT_TOT
  *GET,VALUE(3,2),ELEM,3,ETAB,CFETAB_J

! Warning and error tolerances
  TOLER( 1, 1)= 1E-02 $ TOLER( 1, 2)= 1E-02
  TOLER( 2, 1)= 1E-02 $ TOLER( 2, 2)= 1E-02
  TOLER( 3, 1)= 1E-02 $ TOLER( 3, 2)= 1E-02

!--------------------------------------------------------------------------------------
! Results comparison
!--------------------------------------------------------------------------------------
  COMPARA.MAC