Element types used in the model: BEAM4

Needed CivilFEM Modules:
Geotechnical Module
Bridges and Civil Non Linearities Module
Advanced Prestressed Concrete Module

   FINISH
  ~CFCLEAR,,1
   NomFile='CFVR9122'
 /TITLE,%NomFile%, Biaxial BENDING + AXIAL FORCE CHECKING ACI 318 2019

! -------------------------------------------------------------------------------------
! Initial data
! -------------------------------------------------------------------------------------
! CivilFEM SETUP
 ~UNITS,,LENG,M
 ~UNITS,,TIME,S
 ~UNITS,,FORC,MP
 ~CODESEL,,ACI_19

! Preprocessor
  /PREP7

! Material Definition
 ~CFMP,1,LIB,CONCRETE,ACI,fc_3500
 ~CFMP,2,LIB,REINF,ACI,fy_70000
! Element Type Definition
  ET,1,Beam4                            ! Element Type 1: 3D Beam

! Cross-section definition
 ~CSECDMS,1,CIRC,1,0.45
! Reinforcement definition
 ~RNFDEF,1,1,2,1,0,0.046,0.5120E-2
! Beam & Shell property
 ~BMSHPRO,1,BEAM,1,1,,,4,1,0,,Beam property

! Model Construction
  N,1                                   ! Nodes input
  N,5,5
  FILL,1,5
  E,1,2                                 ! Elements input
  EGEN,4,1,1,1
  D,1,ALL                               ! Boundary conditions

/SOLU
  M1=20				   ! 144.62 Kip*ft bending moment
  M2=15		           ! 108.46 Kip*ft bending moment
  H=-212.46            ! 528.36 Kip axial force
  F,5,FX,H
  F,5,MZ,M1
  F,5,MY,M2
  SOLVE               ! Calculation

/POST1

! Postprocessor
  ~CFSET,,1,1       ! Read first load step

! Bending + Axial checking for pipe sections according to EHE
  ~CHKCON,3DB

!--------------------------------------------------------------------------------------
! DATA CHECK
!--------------------------------------------------------------------------------------
! Data comparison number
  NComp = 2
  NComp_ch = 0

! Matrix dim.
  *DIM,LABEL,CHAR,Ncomp,1
  *DIM,LABEL_CH,CHAR,Ncomp_ch,1
  *DIM,VALUE,,Ncomp,3
  *DIM,VALUE_CH,CHAR,Ncomp_ch,3
  *DIM,TOLER,,Ncomp,2

! Labels
  LABEL(1,1) = 'CRTC2D_I'
  LABEL(2,1) = 'CRTC2D_J'

! Correct values
  VALUE(1,1)=1.3
  VALUE(2,1)=1.3

! Comparison
 ~CFGET,VALUE( 1,2),ELEMENT,4,RESULT,CRT_TOT,I
 ~CFGET,VALUE( 2,2),ELEMENT,4,RESULT,CRT_TOT,J

! Warning and error tolerances
  TOLER( 1, 1)= 5E-02 $ TOLER( 1, 2)= 5E-02
  TOLER( 2, 1)= 5E-02 $ TOLER( 2, 2)= 5E-02

!--------------------------------------------------------------------------------------
! Results comparison
!--------------------------------------------------------------------------------------
  COMPARA.MAC