CFVR0953 - Shell shear reinforcement check according to ACI 349 06

Shell shear reinforcement check according to ACI 349 06.

The model is made up of two square shell elements of 1.0m x 1.0m. Boundary conditions: + Node located at origin has its vertical movement restrained(perpendicular to the shells). + Node located at X=0 and Y=100 cm are completely restrained. + Node located at X=100 and Y=100 cm has its vertical movement restrained(perpendicular to the shells). Applied loads: + Pressure of 3 kg/cm² on one of the elements. + Punctual tension force of 50 kp (X=200,Y=0). + Punctual compression force of 100 kp (X=200,Y=100).
There is no bending reinforcement in the slab. The reinforcement checking code is the ACI 349 06.

Element types used in the model: SHELL43

Needed CivilFEM Modules:
Geotechnical Module
Bridges and Civil Non Linearities Module
Advanced Prestressed Concrete Module

The example can be launched on an educational license.

KEYWORDS

Shell

Shell Vertex

Reinforced Concrete

ACI 349 06

Model Statistics
Number of elements	2
Number of nodes	6
Number of civil materials	2
Number of cross sections	0
Number of shell vertices	1

Log file: CFVR0953.DAT

   FINISH
  ~cfclear,,1
   NomFile='CFVR0953'
  /TITLE, %NomFile%, Shell shear reinforcement check according to ACI 349 06
! ---------------------------------------------------------------------------------
! Model definition and solve
! ---------------------------------------------------------------------------------

! Setup
 ~UNITS,,MONE,EURO
 ~UNITS,,LENG,CM
 ~UNITS,,TIME,S
 ~UNITS,,FORC,KP
 ~CODESEL,,ACI34906
 ~CFCONFG,PLRES   ,SHELL   ,EPSW 
 ~CFCONFG,RESULT,CFSHF,1
 
  /PREP7
! Materials
  ~CFMP,5,LIB,CONCRETE,EC2,C40/50
  ~CFMP,2,LIB,REINF,EC2,S400
! Element types
  ET,2,SHELL43
! Shell Vertex
  t=25     ! Thickness
  r=4      ! Cover
  th = 0   ! Reinforcement angle
 ~SHLRNF,1,t,5,2,r,0.0,0.0,0.0,0.0,0,th,45
 ~SHLSHR,1,2,,12,,,14,14
! Beam & Shell property
 ~BMSHPRO,10,SHELL,1,1,1,1,43,,,,Shell property

! Nodes
  N,10,0,0
  N,20,100,0
  N,30,200,0
  N,40,0,100
  N,50,100,100
  N,60,200,100
! Elements
  MAT,5
  REAL,10
  TYPE,2
  EN,100, 10, 20, 50, 40
  EN,200, 20, 30, 60, 50
! Boundary conditions
  D,10,UZ,0.0
  D,40,ALL,
  D,50,UZ,
! Solve
  /SOLU
  SFE,100,2,PRES,,3.0
  F,30,FY,50
  F,60,FX,-100
  SOLVE

  /POST1
! ---------------------------------------------------------------------------------
! Check with CivilFEM
! ---------------------------------------------------------------------------------
 ~CFSET,,1
 ~CHKCON,SHELL,SHEAR, , , ,1, , , , , ,0  ! Phi=.75 ; fy unlimited 
 ~CFSET,1
 
!--------------------------------------------------------------------------------------
! DATA CHECK
!--------------------------------------------------------------------------------------
! Data comparison number
  NComp = 11
  NComp_ch = 0

 ! Matrix dim.
 *DIM,LABEL,CHAR,Ncomp,1
 *DIM,LABEL_CH,CHAR,Ncomp_ch,1
 *DIM,VALUE,,Ncomp,3
 *DIM,VALUE_CH,CHAR,Ncomp_ch,3
 *DIM,TOLER,,Ncomp,2

! Labels
!--------------------------------------------------------------------------------------
  LABEL( 1,1) = 'VC_X'
  LABEL( 2,1) = 'VS_X'
  LABEL( 3,1) = 'VN_X'
  LABEL( 4,1) = 'VFI_X'
  LABEL( 5,1) = 'CRT_X'
  LABEL( 6,1) = 'VC_Y'
  LABEL( 7,1) = 'VS_Y'
  LABEL( 8,1) = 'VN_Y'
  LABEL( 9,1) = 'VFI_Y'
  LABEL( 10,1) = 'CRT_Y'
  LABEL( 11,1) = 'CRT_TOT'

! Correct values
  VALUE( 1,1)=225.4
  VALUE( 2,1)=247.136
  VALUE( 3,1)=472.562
  VALUE( 4,1)=354.421425
  VALUE( 5,1)=0.7542095
  VALUE( 6,1)=225.71
  VALUE( 7,1)=247.136
  VALUE( 8,1)=472.856
  VALUE( 9,1)=354.421425
  VALUE(10,1)=0.374611
  VALUE(11,1)=0.7542095


! Comparison
 ESEL,S,ELEM,,100
 ~PLSHCON,VC_X 
 *GET,VALUE(1,2),NODE,10,EPSW
~PLSHCON,VS_X 
 *GET,VALUE(2,2),NODE,10,EPSW
~PLSHCON,VN_X  
 *GET,VALUE(3,2),NODE,10,EPSW
~PLSHCON,VFI_X 
 *GET,VALUE(4,2),NODE,10,EPSW
~PLSHCON,CRT_X  
 *GET,VALUE(5,2),NODE,10,EPSW
~PLSHCON,VC_Y 
 *GET,VALUE(6,2),NODE,10,EPSW
~PLSHCON,VS_Y 
 *GET,VALUE(7,2),NODE,10,EPSW
~PLSHCON,VN_Y   
 *GET,VALUE(8,2),NODE,10,EPSW
~PLSHCON,VFI_Y 
 *GET,VALUE(9,2),NODE,10,EPSW
~PLSHCON,CRT_Y  
 *GET,VALUE(10,2),NODE,10,EPSW
 ~PLSHCON,CRT_TOT  
 *GET,VALUE(11,2),NODE,10,EPSW
 

! Warning and error tolerances
  TOLER( 1,1)= 1E0   $ TOLER( 1,2)= 1E0
  TOLER( 2,1)= 1E0   $ TOLER( 2,2)= 1E0
  TOLER( 3,1)= 1E0   $ TOLER( 3,2)= 1E0
  TOLER( 4,1)= 1E0   $ TOLER( 4,2)= 1E0
  TOLER( 5,1)= 1E-03 $ TOLER( 5,2)= 1E-03
  TOLER( 6,1)= 1E0   $ TOLER( 6,2)= 1E0
  TOLER( 7,1)= 1E0   $ TOLER( 7,2)= 1E0
  TOLER( 8,1)= 1E0   $ TOLER( 8,2)= 1E0
  TOLER( 9,1)= 1E0   $ TOLER( 9,2)= 1E0
  TOLER(10,1)= 1E-03 $ TOLER(10,2)= 1E-03
  TOLER(11,1)= 1E-03 $ TOLER(11,2)= 1E-03

!--------------------------------------------------------------------------------------
! Results comparison
!--------------------------------------------------------------------------------------
  COMPARA.MAC

Results

Label	Target	CivilFEM	Ratio	Tolerance
VC_X	225.4	225.08	1.001	1
VS_X	247.14	247.13	1.000	1
VN_X	472.56	472.21	1.001	1
VFI_X	354.42	354.16	1.001	1
CRT_X	0.75421	0.75477	0.999	0.001
VC_Y	225.71	225.79	1.000	1
VS_Y	247.14	247.13	1.000	1
VN_Y	472.86	472.92	1.000	1
VFI_Y	354.42	354.69	0.999	1
CRT_Y	0.37461	0.37433	1.001	0.001
CRT_TOT	0.75421	0.75477	0.999	0.001

Contains proprietary and confidential information of Ingeciber, S.A.

CivilFEM Online Help

CFVR0953 - Shell shear reinforcement check according to ACI 349 06

Shell shear reinforcement check according to ACI 349 06.

Results