Element types used in the model: SHELL43

Needed CivilFEM Modules:
Geotechnical Module
Bridges and Civil Non Linearities Module
Advanced Prestressed Concrete Module

 
FINISH
~CFCLEAR,,1
NomFile='CFVR0959'
/TITLE, %NomFile%,In-Plane Shear Calculation, ACI 349 06 Wall

~CODESEL,,ACI34906
~UNITS,,LENG,IN 
~UNITS,,FORC,LBF
~UNITS,,PRES,,0 ,uuP
! ~CFCONFG,RESULT,CFSHF,1

!-------------------------------------------------------------------------------
! Model definition
!-------------------------------------------------------------------------------

THK    = 1*12.0 	! shell thickness 
COVER  = 0.8		! cover
WDTH   = 5*12.0		! wall width 
L      = 25*12.0	! wall heigth


/PREP7  
ET,1,SHELL43
~CFMP,1,LIB,CONCRETE,ACI,fc_6000
~CFMP,1,USER
~CFMP,1,ACI_C   ,fc_t    ,,6000 ,7,0,0  
~CFMP,2,LIB,REINF,ACI,fy_60000  

~SHLRNF,1,THK,1,2,COVER						! Bending Reinforcement
! ~SHLSHR, IVTX, MATOP,ASSOP, PHIOP, NXOP, NYOP, SXOP, SYOP, ASSOPX, ASSOPY
~SHLSHR,      1,     2,      ,      ,     ,     ,     ,     , 	! Shear Reinforcement
! ~SHLIPSH,IVTX, MATIP, ASSIPX, ASSIPY		
~SHLIPSH,     1,	 2, 0.0987,0.08334 				! In-plane Reinforcement
~BMSHPRO,1,SHELL,1,1,1,1,43,,,,Shell 1

K,1
K,2,    ,,L
K,3,WDTH,,L
K,4,WDTH,,

A,1,2,3,4

TYPE,1
REAL,1
MAT,1

AESIZE,ALL,5*12.0, 
MSHAPE,0,2D 
MSHKEY,1 
AMESH,ALL   
LOCAL,11,0,-10,0,0,-180,-90, ,1,1,
EMODIF,ALL,ESYS,11,		! X Element horizontal, Y Element vertical
CSYS,0
/VIEW,1,,-1 

!-------------------------------------------------------------------------------
! Model resolution
!-------------------------------------------------------------------------------
FINISH
/SOLU

F,2,FX,140000
F,2,FY,80000
F,2,FZ,-40000

F,7,FX,140000
F,7,FY,80000
F,7,FZ,-40000

! Node 1 is restrained in x,y,z directions for translation 
! as well as rotation in the x and z directions
D,1, , , , , ,UX,UY,UZ,ROTX,ROTZ,
! Node 2 is restrained in y,z directions for translation 
! as well as rotation in the x and z directions
D,8, , , , , ,UY,UZ,ROTX,ROTZ, , 
ALLSEL
SOLVE

FINISH
/POST1

~CFSET,,1 
! Element # 1 is selected for design
ESEL,S,,,1
!~CHKCON,SHELL,IPSHEAR,, VAL1, VAL2, VAL3, 
~DIMCON, SHELL,IPSHEAR,, , ,1, ,1, ! VAL1=1-> Walls non-seismic loads, VAL3=1->Fi=0.75
~DIMCON,SHELL,IPSHEAR, , , ,2, ,1, ! VAL1=2-> Walls seismic loads,     VAL3=1->Fi=0.75 
!--------------------------------------------------------------------------------------
! DATA CHECK
!--------------------------------------------------------------------------------------
! Data comparison number
NComp = 20
NComp_ch = 0

 ! Matrix dim.
 *DIM,LABEL,CHAR,Ncomp,1
 *DIM,LABEL_CH,CHAR,Ncomp_ch,1
 *DIM,VALUE,,Ncomp,3
 *DIM,VALUE_CH,CHAR,Ncomp_ch,3
 *DIM,TOLER,,Ncomp,2   

! Labels
LABEL( 1,1) = 'VC_X'		
LABEL( 2,1) = 'VC_Y'
LABEL( 3,1) = 'VS_X'
LABEL( 4,1) = 'VS_Y'
LABEL( 5,1) = 'NSCRT_2X'	
LABEL( 6,1) = 'NSCRT_2Y'
LABEL( 7,1) = 'NSCRT_3X'	
LABEL( 8,1) = 'NSCRT_3Y'
LABEL( 9,1) = 'NAIPSS_X'
LABEL( 10,1) = 'NAIPSS_Y'
LABEL( 11,1) = 'VC_X'		
LABEL( 12,1) = 'VC_Y'
LABEL( 13,1) = 'VS_X'
LABEL( 14,1) = 'VS_Y'
LABEL( 15,1) = 'SCRT_2X'		
LABEL( 16,1) = 'SCRT_2Y'
LABEL( 17,1) = 'SCRT_3X'		
LABEL( 18,1) = 'SCRT_3Y'
LABEL( 19,1) = 'SAIPSS_X'
LABEL( 20,1) = 'SAIPSS_Y'
      
! Correct values
~CFGET,Txy_Shell, ELEMENT, 1, FORCE,TXY, I   ! In-plane shear

! Walls non-seismic design
VALUE( 1,1) = 1487.23
VALUE( 2,1) = 753.9
VALUE( 3,1) = 4734.9834
VALUE( 4,1) = 5468.3134
VALUE( 5,1) = ABS(Txy_Shell/5577.1)
VALUE( 6,1) = ABS(Txy_Shell/5577.1)
VALUE( 7,1) = 0.0025/(0.09865/12)
VALUE( 8,1) = 0.0025/(0.113923/12)
VALUE( 9,1) = 0.09865
VALUE( 10,1) = 0.113923

! Walls seismic design
VALUE(11,1) = 1487.23
VALUE(12,1) = 753.9
VALUE(13,1) = 4734.9834
VALUE(14,1) = 5468.3134
VALUE(15,1) = ABS(Txy_Shell/5577.1)
VALUE(16,1) = ABS(Txy_Shell/5577.1)
VALUE(17,1) = 0.0025/(0.09865/12)
VALUE(18,1) = 0.0025/(0.113923/12)
VALUE(19,1) = 0.09865
VALUE(20,1) =  0.113923

! CivilFEM values     
~CFSET,1	! Walls non-seismic design
~CFGET,VALUE( 1,2), ELEMENT, 1 ,RESULT , VC_X, I 	
~CFGET,VALUE( 2,2), ELEMENT, 1 ,RESULT , VC_Y, I 
~CFGET,VALUE( 3,2), ELEMENT, 1 ,RESULT , VS_X, I 	
~CFGET,VALUE( 4,2), ELEMENT, 1 ,RESULT , VS_Y, I 
~CFGET,VALUE( 5,2), ELEMENT, 1 ,RESULT , CRT_2_X, I 	
~CFGET,VALUE( 6,2), ELEMENT, 1 ,RESULT , CRT_2_Y, I 	
~CFGET,VALUE( 7,2), ELEMENT, 1 ,RESULT , CRT_3_X, I 	
~CFGET,VALUE( 8,2), ELEMENT, 1 ,RESULT , CRT_3_Y, I 
~CFGET,VALUE( 9,2), ELEMENT, 1 ,RESULT , AIPSS_X, I 	
~CFGET,VALUE( 10,2), ELEMENT, 1 ,RESULT , AIPSS_Y, I 

~CFSET,2	! Walls seismic design
~CFGET,VALUE( 11,2), ELEMENT, 1 ,RESULT , VC_X, I 	
~CFGET,VALUE( 12,2), ELEMENT, 1 ,RESULT , VC_Y, I 
~CFGET,VALUE( 13,2), ELEMENT, 1 ,RESULT , VS_X, I 	
~CFGET,VALUE( 14,2), ELEMENT, 1 ,RESULT , VS_Y, I 
~CFGET,VALUE( 15,2), ELEMENT, 1 ,RESULT , CRT_2_X, I 	
~CFGET,VALUE( 16,2), ELEMENT, 1 ,RESULT , CRT_2_Y, I 	
~CFGET,VALUE( 17,2), ELEMENT, 1 ,RESULT , CRT_3_X, I 	
~CFGET,VALUE( 18,2), ELEMENT, 1 ,RESULT , CRT_3_Y, I 
~CFGET,VALUE( 19,2), ELEMENT, 1 ,RESULT , AIPSS_X, I 	
~CFGET,VALUE( 20,2), ELEMENT, 1 ,RESULT , AIPSS_Y, I 

! Warning and error tolerances
TOLER( 1,1)= 1E-2 $ TOLER( 1,2)= 1E-2 
TOLER( 2,1)= 1E-2 $ TOLER( 2,2)= 1E-2 
TOLER( 3,1)= 1E-1 $ TOLER( 3,2)= 1E-1
TOLER( 4,1)= 1E-1 $ TOLER( 4,2)= 1E-1
TOLER( 5,1)= 1E-2 $ TOLER( 5,2)= 1E-2
TOLER( 6,1)= 1E-2 $ TOLER( 6,2)= 1E-2
TOLER( 7,1)= 1E-2 $ TOLER( 7,2)= 1E-2
TOLER( 8,1)= 1E-2 $ TOLER( 8,2)= 1E-2
TOLER( 9,1)= 1E-2 $ TOLER( 9,2)= 1E-2
TOLER(10,1)= 1E-2 $ TOLER(10,2)= 1E-2
TOLER(11,1)= 1E-2 $ TOLER(11,2)= 1E-2
TOLER(12,1)= 1E-2 $ TOLER(12,2)= 1E-2
TOLER(13,1)= 1E-1 $ TOLER(13,2)= 1E-1
TOLER(14,1)= 1E-1 $ TOLER(14,2)= 1E-1
TOLER(15,1)= 1E-2 $ TOLER(15,2)= 1E-2
TOLER(16,1)= 1E-2 $ TOLER(16,2)= 1E-2
TOLER(17,1)= 1E-2 $ TOLER(17,2)= 1E-2
TOLER(18,1)= 1E-2 $ TOLER(18,2)= 1E-2
TOLER(19,1)= 1E-2 $ TOLER(19,2)= 1E-2
TOLER(20,1)= 1E-2 $ TOLER(20,2)= 1E-2

!-------------------------------------------------------------------------------
! Results comparison
!-------------------------------------------------------------------------------

COMPARA.MAC